Search the forum,
Questions and plumbing advice in the Central Heating Forum - Also see on the electrical forum: Central Heating Systems..

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

Morning All I have a Valliant Ecotec Plus boiler which runs our under floor heating at ground floor and rads on the first and second floors. Both systems are controlled via a Drayton Digistat SCR with a receiver on the ground floor and the other on the first floor. All has been working well...
Replies
13
Views
3K
Hi I have a ideal logic 35 combi boiler is just little over 4 years old in a new build property was great for first few years but since about 2 years maybe it keeps loosing pressure what I top up. Once it lost it but then the filling loop wouldn't fill back up had someone out they said it may be...
Replies
21
Views
5K
No LED information on a Honeywell cm921. Batteries all changed & checked, any ideas pls. Can they be repaired or is it a new one required
Replies
3
Views
2K
AABBCC
A
    • Like
Hi I have a leak from one of the pipes, going into the hot water cylinder, in the airing cupboard. There are 2 pipes going into the cylinder on the left hand side, (I think it is called a vented cylinder - colder water tank in loft) and it is the top pipe which is leaking, (the one with yellow...
Replies
69
Views
9K
i have relocated the pipes from the old boiler and remove the hot water and heating expansion pipes i have used the hot tank pipes to fix a small rad in the old airing room removed the pump and connected the flow and return from the boiler 5 out of eight rads d/stairs work the rest nothing this...
Replies
8
Views
2K
Evening, new install of a baxi 830. 6 weeks old have one rad and two towel rails also wet UFH. was all working great got a Heatmiser controlling the UFH and a Drayton basic wall stat the rads, both systems have separate motorised valves. as I had hive previously to the house refurb I bought...
Replies
7
Views
2K
Hi all, I am hoping someone can help me on this one. I have a Glowworm Flexicom 12hx boiler, currently getting two different error codes (F25 and F22). Landlord believes the boiler has lost pressure and needs topping up, but I have no way of checking the boiler pressure - no dial and no on...
Replies
13
Views
6K
having a few issues with my boiler. worcester bosch greenstar 28i. has been serviced every year. last serviced in jan. i moved into this property in feb. been experiencing these issues since feb but in the past month has gotten much worse. so radiators work fine they all heat up. the combi...
Replies
8
Views
4K
GeorgeHunt
G
I've fitted a completely new burner to a Grant Combi 70 and the motor will not run (so consequently the burner won't fire) despite there being live 230v power to the control box. I have read the wiring diagrams and even spoken to Grant themselves but I cannot get to the bottom of the problem so...
Replies
20
Views
4K
I have a system boiler with 2 unvented hot water cylinders. There is no hot water in the loft bathroom tap. But hot water is coming in the loft bathroom thermostatic shower. Moreover hot water is coming in the other 8 bathrooms. When you switch on the loft bathroom shower, hot water starts...
Replies
3
Views
1K
Disclaimer: I know very little about boilers so sorry if my assumptions are way off! From testing by logging energy usage, and that if I turn the boiler on the meter lights up like a Christmas tree, it seems our Santon PremierPlus boiler (PP170E) is constantly running causing extreme energy...
Replies
10
Views
4K
Any ideas why the Hot Water indicator light would stay on for up to an hour after the tap is turned off? Potterton Promax Combi HE 28. Boiler not staying ignited, fan and pump running
Replies
3
Views
1K
Aquarius
A
Hello I am having a problem with my heating system My radiator are getting hot at the top but are cold at the bottom. Was told by a powerflusher who came around and checked the radiators with a thermal imaging camera and was advised they are not blocked and does not need a power flush...
Replies
6
Views
2K
Hi all, calling on your wisdom do a slightly unusual scenario that someone may she light on, I’m sure it is one of the usual suspects..typical timing when you live in the middle of nowhere up north where it was -11 last night and same tonight. Boiler shut down yesterday morning, was in the...
Replies
2
Views
3K
Hi All, Yesterday I drained down my water system and when I went to re-pressure the sytem the fill loop valve is stuck and will not open. I have removed the handle grey handle and managed to use a spanner to turn it but still no joy. If I remove the silver hose and open other valve there...
Replies
5
Views
3K
S
I have a constant problem with the potterton pro max store: it trips frequently or overheats with error e110 when central heating is on. This has been happening for the last year or longer. It happens 1-2 times a week sometimes more often. Baxi guys were here 8 times with no success: they have...
Replies
0
Views
1K
Seb_1975
S
Hi, I’ve got an EcoTEC pro boiler which is showing code F22 and therefore not turning on. Last night I accidentally turned it off at the mains and only realised this morning; I’m not sure if this is simple coincidence? I’ve done it before without problems following. I have an external hose to...
Replies
2
Views
1K
Today I partially emptied the central heating system (1st floor and loft) so that I could disconnect an old towel rail and install the pipe work ready for the new towel rail. All went well and I have two capped pipes sticking out of the wall where the new towel rail will be fitted. Having...
Replies
10
Views
2K
Hi I am having a pellet boiler installed in spain and the instruction manual says "maximum working pressure of boiler is 2 Bar" the plumber is installing a saftey group which has a prv of 4 bar so I'm just wondering should the pvr be 2 bar or is that working pressure and 4 bar release if things...
Replies
10
Views
2K
My boiler pressure gauge is at zero so the boiler is not firing up. I thought I heard a small water leak in the wall near the boiler the other night, just before this happened, but the leak has now stopped. I have been reading other posts to try to find a solution and I've hunted everywhere...
Replies
10
Views
5K
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock