Questions and plumbing advice in the Gas Engineers Forum - This is a PUBLIC Gas Engineers Advice Forum..
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Forum Prefix Filter
Hi all, just this morning seem to have a new problem to us with our Rayburn. Oven and central heating all operating as normal, however we have no hot water from any taps. We would normally hear the Rayburn kick in when hot water is demanded… however it is not.
Any help hugely appreciated
Hi Morning, I am looking at a new boiler and hot water cylinder setup for a house I am refurbishing and am getting conflicting advice on my question: Can I use a Combi or System boiler to have a different flow temperature for the hot water tank heater and the radiators. I appreciate the hw...
Hi all,
Recently our house central heating always turned on in the morning (and in the evening of course), but this morning, Saturday, we got up late without turning it on yet, about 9:20ish I heard the pump was making noise! About 9:29ish the noise stopped.---This is to say, boiler not turned...
Hi all,
My customer needs a new water heater/boiler - preferably electric. (Getting the gas pipe through to the desired location is a bit of a no-go. It's a tiny stone-walled, screed floored terraced cottage, with no easy route for the gas pipe. So we're looking at electric options).
Two people...
Hi my boiler has stopped heating the water, the pressure is fine just over 2, plenty of money on gas and my gas hobbs work fine, the water pressure is fine, but as you can see from the video it starts uo then at a certain point cuts out and goes up to 99 then to 00
Any help be appreciated
Could someone take a look at this for me please?
Just had a boiler put in our property on a grant scheme. The boiler is great other than him not cleaning the pipework including gas joints before leaving 🙁.
I've cleaned it up and it seems alright.
My other main worry though was what the follow...
Hi all,
I posted a few months ago about a 'no hot water' problem, and it turned out that it was a diverter valve problem.
But still, from time to time, not too frequently fortunately, we have only lukewarm/cold water in our taps/showers. What could be the problem?
- sometimes, the trick to...
Hello lovely people,
I've gone and got an LPG water heater for my shepherds hut. It'll be situated in an external lean-to enclosure built on the back of the hut, as it is not a room sealed model. (I wanted to save as much space as poss in the tiny loo/shower room). Before getting a gas safe...
Called to repair Baxi Duo-Tec Combi no hot water? Replaced plate heat exchanger blocked solid replaced change over cartridge and DHW sensor still the same issue Boiler comes on reaches 43-45* then shuts down then reignites and then same again? I took the inner door panel off while the hot tap...
Hello all. I'm new to this forum and need some advice about some concerns about a new gas boiler that I have had fitted by a gas safe engineer.
My old boiler was a heat only (with a copper tank) and has been replaced by a modern combi boiler. It just used two 22mm pipes to feed to the diverter...
Hi,
I have a WB Greenstar 30 Si and I am having a problem where the DHW intermittently cuts out then comes back on after a couple of mins. It happens on all taps/showers including the kitchen tap. When the problem occurs the flame light on the boiler goes on and the fault indicator light stays...
Hi!
I have a 9 year old Baxi combi boiler. When I turn the central heating on, the boiler pressure is getting so high that it keeps cutting out completely. It's absolutely fine when I run any hot water though. Does anybody know what the problem is likely to be please?
Thank you
Hi,
I'm new to this forum, please apologies if this is not posted in the right section, or an answer exists already somewhere.
I have this issue: no hot water in any tap in the house, but the central heating works fine. The boiler is a Vaillant system 15.
A gas engineer had a diagnosis and...
Hi Guys,
Got a issue with a Worcester Greenstar 28i Junior. Have replaced the expansion vessle and PRV due to the vessle splitting and prv letting by.
After this there are 3 radiators 2 towel rads and one bedroom rad which get hot when running hot water tap.
I have checked the diverter valve...
Has anyone experienced this before. Converted gravity hot water to new unvented cylinder (150l indirect evocyl) filled the cylinder up and had yellow water for about half an hour before it started to clear. Any ideas from anyone. I’m G3 registered. Was converted due to suspected split coil in...
Boiler was working fine but now whenever I take a shower the hot water fluctuates from hot to luke warm. Looking at the boiler display, I can see the flames come on to max and hear the boiler working and then go down to min/off after a few seconds and then back on repeatedly. I checked the...
Customer has a Main Multipoint BF that needs the diaphragm replacing. I'm attempting to remove the water valve but one of the screws that fix it to the bottom of the gas valve just won't budge. The head of the screw is completely stripped. My trusty neji-saurus screw pliers turned it about 45...
Hi,
Customer has a Main Multipoint Balanced Flue water heater.
Both the gas rate and burner pressure are under what the MIs state. MI state burner pressure is pre factory set at 14.1mbar and should not need adjusting and my checks showed burner pressure as 6mbar. Gas rate MI state 2.9 m3/hr...
Good evening ,
Heatline monza, pressure gauge rises and reacts as if air hitting the exchanger, boiler cuts out then back on it then opens the prv. This only happens when there is a demand for hot water. Heating seems to run smoothly with minimal increase in pressure. I checked expansion...
Hello team,
first of all, I apologise if this isn't the right section of the forum to ask, if so, please dear moderator, move the thread!
I am here to ask help as I just moved in a new house where I have a boiler that doesn't allow me to specify the temperature for water or for the heating but...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Pop quiz, does anyone recognise this radiator valve?
- Started by dimuc
- Replies: 1
-
SUsing coil to clear pipe leading to gutter
- Started by Sonya K
- Replies: 1
-
Replacing outdoor P-Trap Gully with Bottle Gully
- Started by DIwhYdidIstartThis
- Replies: 0
-
-
-
-
-
Mixer mixer shower, compatible with tanked supply
- Started by Matt0029
- Replies: 2
-
-
No Hot water, Fixed and Broken Again Ideal Logic 24
- Started by Filthbags
- Replies: 2
-
-
What's happening to this radiator, paint flaking off?
- Started by mikmikmikmik2024
- Replies: 3
-
Is it necessary to earth bond a Kitchen Sink?
- Started by Cello
- Replies: 6
-
Show us your fanciest radiators you have installed!!
- Started by Lou
- Replies: 4
-
Y Plan, no hot water but heating is working when called
- Started by Chopper9495
- Replies: 8
