Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 33
- Views
- 19.9K
There was a slight delay when you were typing and it was down to the smilies bar I had installed. So I've removed it. But not the smilies. Those are added to a post by clicking the happy face in the text options area now.
If there is an unvented cylinder being installed in the loft,
System boiler downstairs, how would you decide what size expansion vessel to put on the heating side and how will you configure the Pipework for heating expansion vessel in the loft. As there will be an expansion vessel in the boiler...
- Locked
Good morning all,
My boiler or boilermate stopped working at the weekend. Is there anyone on here who has good knowledge in this system and could come round and fix? We live in West Sussex.
Regards
Neil
Can someone please tell me what I have done wrong. Fitted a new tank exactly as old one recently but since then the hot water pressure up and downstairs has been really low. (E.g. A good 10/15 mins to fill kitchen sink) It is a gravity fed system. No gas. So far tried to clear any airlocks...
- Locked
Good afternoon
I am seeking part time work on Thursdays and Fridays in the above locations if possible please.
I have had previous experience on the tools and have recently paid for and completed my City and Guilds 6129 diploma in plumbing and heating.
I have all my own tools and a csr to...
We've been having issues with our washing machine recently where it is filling up in the drum overnight with clean water.
I just went to look underthe sink to check (actually don't know what I was checking for!) anyway I knocked a small blue lever about 1/4 turn and all this water came gushing...
Our toilet seat screws are hidden in the pan and are self tightening, however they just spin around in position and won’t tighten. Any advice please
A dishwasher was not emptying. Filters etc all clear. The owner removed the machines flexible waste pipe from the waste stand pipe saying there must be a blockage in the stand pipe. He poured drain cleaner fluid into the standpipe, refitted the flexible waste pipe and ran the dishwasher, all...
Similar Threads shown at the bottom of the thread you're reading - is back.
But thanks to those who contribute to the forum by way of Upgrading Their Account to a Subscribed Member it is now using the all singing all dancing enhanced searching feature, rather than just using the thread titles...
Having a load of work done at the moment, part of which is to have wet UFH installed, just looking for any thoughts around the best system to use.
There seems to be lots of choice, looking for 3/4 zone system.
Any thoughts greatly appreciated.
Hi, I had an Ideal C30 combi fitted about two months ago and I have noticed that it sometimes loses a really small amount of pressure. I fill the loop until it is on exactly 1 bar and sometimes when I look at the gauge it has dropped about 1mm below and then another day it will be back up to 1...
I can’t remember if it was here or somewhere else I saw someone had fitted a compact low loss header
Need something 40kw rated (vaillant 637)
The WB and vaillant ones are too big
Dare I ask what’s this new feature? Now you can’t post on the same topic until waiting nearly a minute and a half. Is this new software just trying to get you to limit the amount you add ? Another annoying function.
Hi,
The thermostat dial is just about on 1, but it should be between 1 and 2? The temperature is constantly high too. Should be around 40. The boiler is also making some vibrating noises once the hot tap is running.
How do I adjust the pressure gauge if its external?
Any help/advice will be...
Both flue and air held together with cooking grease.
Spent the first hour cleaning!
Hi,
A friend has s plan system, unvented how water tank, ideal logic heat only boiler and potterton programmer (was changed with like for like about 6 months ago).
It keeps blowing the 3a fuse in the fuse spur. Boilers been turned off at the front of the boiler (the control knob) and issue...
Hi guys
Does anyone follow a code of practice when it comes to using a customers toilet for a number 2??
My rule is job must be a 2hr plus!
Can’t imagine turning up to customers to change a tap cartridge, 10 minute job and 15 on the bog!
Also, bog brush or bleach is a must!
Let me know...
I know there are Fitters etc from the free state on UKPF. We want to check out Plumbers merchants down the east coast from Dublin south down past Cork. We have identified some but
any local info would be welcome. We have the international outfits but local ones would be handy. centralheatking...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Any advice for putting this shower in ?
- Started by Staggersandfalls
- Replies: 2
-
king of pipes no reply from private message
- Started by cjg
- Replies: 1
-
-
-
Why pressure gauge drop without leak
- Started by sanju pradeep
- Replies: 4
-
Hot water so hot tap and shower via our hot water tank
- Started by thecar
- Replies: 4
-
-
Running copper pipework above / across a Gas boiler?
- Started by kristeva
- Replies: 2
-
Installing pipework to avoid airlocks
- Started by Matt0029
- Replies: 1
-
DUK Pipes for thermostat shower fitted at different heights
- Started by Delforkids
- Replies: 2
-
-
-
SPorcelanosa KRION Attica screen 1.2m, anyone?
- Started by Sebastian T
- Replies: 0
-
Cistern filling one third of the way
- Started by dwaindigital
- Replies: 4
-
Boiler losing pressure only on central heating- Started by SnosRap75
- Replies: 6