Search the forum,

threads

CONFIG.SYS is the primary configuration file for the DOS and OS/2 operating systems. It is a special ASCII text file that contains user-accessible setup or configuration directives evaluated by the operating system's DOS BIOS (typically residing in IBMBIO.COM or IO.SYS) during boot. CONFIG.SYS was introduced with DOS 2.0.

View More On Wikipedia.org
Recent contents Top users
  1. L

    What threads for flexi pope to expansion vessel?

    Hi all, I need to order a flexible pipe to connect this vessel up with. The pressure vessel instructions don't mention the thread size? A 22mm pipe almost fits over the threads so I assume it's 3/4 BSP? Does that sound right? The other end goes to the valve, will a flexi like this...
  2. Richard1233

    Straight or tapered threads on concealed shower valve

    I have a Victoria Plumbing concealed valve with 3/4" and 1/2" female inlets/outlets. I need to connect male iron 90 degree elbows (with compression fittings to the pipework). Should I use straight or parallel threads into the valve? I am thinking that I can use straight if I use Loctite 55 cord...
  3. C

    BSPP seal tap handle with threads too short for washer?

    I am trying to seal a tap (wall mount faucet for a lavatory/bathroom) my wife purchased from Morocco. We live in the US, and everything is NPT over here, but the thread on the moroccan piece is BSPP G 1/2. I got some G 1/2 dowty sealing washers (steel band with a neoprene gasket inside, and that...
    • Colin McMullan
    • Thread
    • america bspp handle seal short tap threads usa washer
    • Replies: 1
    • Forum: USA
  4. Gasmk1

    Adverts blocking parts of threads

    Anybody else struggling with adverts blocking parts of forum threads
  5. N

    Parallel or tapered threads on new rads?

    Hi All, I'm learning loads of new stuff by reading threads on this excellent forum (old dog too!)... but last night I was reading on here about rads and extension tails, and followed a link to a Screwfix product that was a tapered tail,.. but reading the Q&As there, the 1st Q asked if it was NOW...
  6. D

    Brass connectors with "serrated" threads (why?)

    Hi, I've been buying parts for a water purification system and notice that some of the brass fittings with external threads (they are size G25 = 1") have regular serrations on them. Here are a couple of pictures... Other fittings I see available do not have these features.... I've searched...
    • davblo
    • Thread
    • america brass connectors threads usa
    • Replies: 17
    • Forum: USA
  7. R

    How to remove brass male iron threads from LCS socket?

    Hi, As some of you are aware, I am currently stuck in Italy running a shop that has nothing to do with plumbing :( Yesterday I thought I'd got most of what I needed to get done by lunchtime and was able to take the rest of the day 'off' (which actually means try to get done the things that are...
    • Ric2013
    • Thread
    • america brass broken deal iron male remove socket threads usa
    • Replies: 6
    • Forum: USA
  8. M

    Radiator Valve Threads

    Evening All, I have had a several rads fitted in my house over the last few years and I am having problems with some where the paint is cracking and causing the radiators to leak. Two have been replaced by the online suppliers and another is in the process of being exchanged. See attached...
    • mje1987
    • Thread
    • america radiator threads usa valve
    • Replies: 5
    • Forum: USA
  9. SimonG

    Delay In Responses To Threads.

    Just noticed that in the new posts it says that there is a new reply. But when you click into it there is nothing there. Just wondered if the new posters are moderated and the system knows they've responded but its waiting approval. Noticed it a couple of times.
  10. Dan

    URGENT New URGENT Prefix Available For New Threads

    @centralheatking suggested we have an urgent area of the forum: Suggestion with regards to Urgent Plumbing Advice I thought I'd add a prefix for threads for now. Perhaps if we end up a lot lot busier we'll lose new threads easy and then it might be needed as a whole section of the forum...
  11. Dan

    Don't fall out with members - please keep threads on-topic

    I'm seeing a pattern that has developed here. And it's my fault. I haven't guided you guys. But I will as soon as I have a mo'! My to do list keeps nearly ending, and then I have half a dozen urgent things added. No point in me screwing up all forums with customisations. Once I have it right on...
  12. Dan

    Similar threads showing at the bottom of the thread you're reading....

    Similar Threads shown at the bottom of the thread you're reading - is back. But thanks to those who contribute to the forum by way of Upgrading Their Account to a Subscribed Member it is now using the all singing all dancing enhanced searching feature, rather than just using the thread titles...
  13. rpm

    Why are so many old threads in this sub forum locked?

    As per the title, I was looking for an old thread and see they are all locked down!
  14. Chalked

    Troll threads ..........

    is it me. But there’s lots of random stupid posts at the moment. I’m sure they are wind ups!
  15. A

    Radiator Valve Threads

    Hi All, Not a plumber but pretty handy with tools and experienced DIYer, however have come across a 'good one' that I am struggling with and wondered if someone would be able to provide some help. I have a 1930's house and a set of radiators with what seem to be very odd tails on them. I need...
  16. A

    Have my recent threads been removed?

    I could be mistaken but have my last couple of threads been removed? It could be my phone as sometimes it won't let me access certain areas of the site. Hopefully someone can shed some light. Thanks
  17. T

    Connecting BSP iron threads at specific angle

    Hi there, I am making connection to the backboiler on a Rayburn. It has 1"BSP female threads. I understand I need to use male BSP iron connectors with fibre washers. I need the flow pipe to exit and immediately turn a sharp right angle downwards, in order to avoid part of the fitted kitchen...
  18. O

    Disappearing Threads.

    Is it just me or do other people have this problem? When you post a reply to a thread, does the thread disappear from the 'New Post' page. I have recently noticed this happening. Unless someone else replies to the thread, then it will not appear in the 'New Posts'. If you want to search the...
  19. jonnyswamp

    Old threads

    Whatever subforum I click on, a load of old thread come up instead of the most recent What have I done and how do I rectify it
  20. W

    The new tunes thread

    Wheres that gone. was on it now its disappeared.
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock