Search the forum,
Questions and plumbing advice in the Central Heating Forum - Also see on the electrical forum: Central Heating Systems..

Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's

Forum Prefix Filter

  • Locked
Hi All, I have a Main Eco 30 Combi boiler I was fitted about 7 years ago, the whole pipe work is new and radiators. I have so far replaced the electrodes since it was old and bent (it was working but I wanted to avoid it failing), the heat exchanger was hoovered and the seal was replaced, the...
Replies
18
Views
3K
Hi everyone. I've just joined this forum as I'm desperately in need of some help. My elderly parents (81 and 77) have a Baxi Solo 3 pf60 and it has been giving trouble. I'm not a plumber but a process operator for a chemical manufacturer and an experienced DIYer, so I'm obviously limited with...
Replies
3
Views
2K
Does a Worcester 28CDi Combi have to be taken off the wall to change the plastic return manifold?
Replies
2
Views
1K
I have a very old radiator for which we cannot find a key for. It desperately needs bleeding, any ideas on how I can do it or is it time for a new radiator?
Replies
9
Views
11K
Gas boiler shows No Water Pressure. The water feed to feed the system doesn't move gauge. Water dumps overboard. A banging noise starts when the valve to top up the system is opened.
Replies
5
Views
1K
potterto boiler 23 years old, Drayton mid point actuator. Central Heating only works when water also on & stat works normally. When CH only, the stat shows a bright light when calling heat and dim light when at temperature. I changed the stat and it made no difference. The three way valve seems...
Replies
22
Views
2K
after 2 years and 7 plumber visits i'm now going to try and alleviate the problem myself!, according to said plumber visits i have a blockage between lower and upper radiators, downstairs perfect, apart from 1 needing bled ocassionally, upstairs rads have clear water but no heat, any clues to...
Replies
7
Views
1K
Can someone please advise as to what is causing this issue with my sons boiler
Replies
1
Views
1K
I have made some adaptations to the layout of an existing open vented one pipe system. The pump is now some 6 or 7 metres away from the boiler. The cold feed is on the negative side of the pump as is the expansion pipe. The order of fixing is expansion pipe - cold feed - pump. When the pump...
Replies
6
Views
2K
My LPG Glow.worm Ultracom 30 sxi boiler has exploded in some way. The front has blown open and the casing has buckled. (I was on holiday at the time. Thermostat left set at 16deg.) Annual Service four weeks ago. Boiler and heating still working! Any suggestions on cause?
Replies
14
Views
5K
Post a New Thread / Question
Creating content since 2001. Untold Media.
OFFICIAL SPONSORS

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock