High FGA Readings

[mrmills]

Working on a glowworm flexicom 18hxi today and I had the following results :
02 - 4.2%
C0 - 1716 PPM
Ratio - 0.0180
C02 - 9.5%

It is only 3 years old, gas valve has been reset as per manufacturers instructions and tried two anaylsers in case was faulty. Any suggestions ??

 

[nysk2008]

You'll have to mail one of the mods to get a bit of advise in the GS reg forum

 

[mfgs]

I know what the problem will be, but you need to get in the private gas safe forum, pm one of the mods for access. I hope you didnt leave the boiler running.

 

[mrmills]

No I ID it and capped it. How do I get into private forum ? Sorry new to this and heading back to property tomorrow. I have ordered up new gas valve and was going to head back and clean main burner but manufactuer said unlikely dirty to that extent after 3years.

 

[mfgs]

Announcements - Gas Safe Register Forum - Public Forum

 

[1mzmk1]

I have just unearthed this thread and have the same problem with an Easicom, I'll try and get myself registered for the private forum...

 

[Dotty]

Good lad, I'm closing this one.