Search the forum,

test

TeST Gliders is a manufacturer of ultralight sailplanes and motorgliders based in Brno, Czech Republic.

View More On Wikipedia.org
  1. Stout0607

    Flue integrity failed I'd or at risk

    flue integrity test failed on a room sealed boiler however not effecting combustion and not leaking into room, would it still be I'd or can it be at risk.
  2. J

    Boiler test point cap missing.

    Hello my dad had a boiler check up today and the cap on the flue above the boiler had fell off. It's potentially been like that for a long time. Was this dangerous? We have a carbon monoxide detector but that never went off. I have posted a picture below of the little cap, the engineer...
  3. B

    AUS Elevated moisture on floor despite pipe pressure test ok

    Hi. I had a pressure test done on the toilet connection tap. Test showed no leak. However, thermal imaging showed elevated moisture levels around the tap (& toilet (on the floor). I am wondering if it is possible that there could their have been a long time (ie years) slow leak from the pipe /...
  4. D

    Worcester Bosch 542/i - failed sweep test on electrode plate?

    Hi I've just had my annual maintenance check on my boiler (in title), it will be 8 years old in May this year and is (I think) still under guarantee as I get it checked annually with British Gas (they installed it and said the guarantee would be extended until it is 10yr old if I kept the annual...
  5. J

    10 Question ACS Test

    During Covid I had to undertake a phone consultation to pass my Gas Safe Inspection. I failed dismally even though I have over 35 years experience! I am extremely knowledgeable in my industry, but when the pressure of having to answer rapid fire questions over the phone, and with an expectation...
  6. I

    Tightness test lpg system?

    can somebody explain to me the reason why you have to do a tightness test then purge and then complete another tightness test on a lpg system rather than purging and then just doing one tightness test. How help will be much appreciated and so I get a better understanding. Thanks
  7. N

    Pressure drop on test guage, nothing at meter

    Hi all, I am wondering if someone can make sense of this. I have been trying to determine if there is a leak on an existing water supply pipe. Attached a dry pressure guage to garden tap and turned tap on. Pressure went to about 3.5 bar then I shut off supply at the water meter. Over the next...
  8. M

    Gas meter test nipple

    The holder for the test nipple is loose moved when tightening and un-tightening the test nipple. Is it usual to just unscrew this, paste and tighten back up?
  9. C

    Weird result on LPG tightness test

    New LPG installation with 2x 19kg cylinders outside, plus change-over regulator with isolator valve on output, then 10 metres of 15mm copper pipe (3 soldered joints only) running into house to the kitchen, to gas hob (with another isolator just prior to hob). System Failing tightness test...
  10. C

    Flue Integrity Test.

    Hello, I'm after a bit of advice. If you, as a gas engineer, needed to "fault find" on a boiler that has a problem, would you do a flue integrity test as one of the first ports of call. The boiler ignites, stays lit for 20 seconds or so then shuts off. About 20 seconds later, the boiler...
  11. J

    Resitting CCN1 test

    I am looking to resit my ccn1, I am time served and passed the test in 2011 but had a carear change and went to work offshore for the last 9 years, looking to get back to gas side of things, just wanting to know has alot changed in the test, What is the best resource for studying/revising. I...
  12. M

    Isolating boiler to test if hex is causing pressure loss

    If Isolating a boiler to determine if the leak is on the pipework or the boiler. If pressurising to 1.5bar then isolating the flow and return for an overnight test. Is it still acceptable to use the combi boiler for hot water? Expansion vessel located in the boiler.
  13. R

    What is the best way to pressure test oil line with tigerloop?

    With regs requesting more oil line pressure testing, what's the best way to test an existing oil line with a tiger loop. Can you leave it in place or do you exclude form test. ?
  14. H

    Gas Valve - Inlet Test Point and Burner Test Point screws

    Hello, Some advise please. Doing my gas course so I have taken a few boilers home to practise taking them apart so I can understand more how they work. For the gas valve in a Worcester boiler I got my hands on I have been trying to undo the screws for the Inlet test point and Burner test...
  15. dilligaf

    How Do I Test A Synchron Motor

    Hi, can anyone tell me the best way to test a synchron motor on a 3 port motorised valve?
  16. Z

    Looking for Nottingham plumbing company to test a new radiator lifting device

    Hi, I'm working with a plumber who have developed a small new device to help with the movement, fitting and lifting of radiators to hopefully make this quicker, easier and safer. We've got the world's first patented prototypes and I'm looking for a plumber who regularly fits radiators, in...
  17. A

    Finding a leak - cold water pressure test conflicting results

    Hi, I'm new here and appreciate any help or ideas on the below. I suspect there's a underfloor leak as I have a damp patch on the wall, rotten floorboards and skirting boards between the bathroom and the living room. Leak tracing (gas, thermo, acoustic) concluded there is no leak despite the...
  18. S

    Should I pressure test relatively small plumbing job

    I am a DIYer that is looking to address piping under my en-suite floor, whilst I am undertaking a major re-ferb of the room. With reference to the picture, you can see that I have a number of JG connections under the floor and they will ultimately be tiled over. To complicate things further...
  19. D

    GlowWorm 30 CXi gas test cap has fallen apart.

    Hi everyone. When I looked in the cupboard where our gas combi boiler is installed, I found a wee white plastic cap which had pretty much disintegrated. A search found it was the cap that's meant to seal off the flue test point - from which a nice breeze from outside was ensuing. As it...
  20. R1rider

    Help pressure test pump for rothenberger pump

    Hi guys had to open a new account not sure what happened to my old one.. Is there a drill pump out there that can pump up my 1st fixes for pressure tests? As doing it by hand can take a long time. Thanks.
Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock