people have to get out of the frame of mind all tradesmen are trying to rip them off I take the points of the last few posters but you can read between the lines and pick up on the suspicious undertones. Why does something cost what it costs? Why can't the plumber match the prices I found on the Internet? I have seen on eBay that I can get a boiler install from £1200 Why is my Installer so much more expensive? The answer to all these questions is communication. An engineer quoting for the work for you should never mind answering questions A decent install will cost a decent amount of money simple as. The problem is people don't ask questions and then get angry when something isn't done as they expected. with the best will in the world we are gas engineers and can probably provide quite a lot of information we think would be relevant to you but we can't second-guess those nagging questions you might have. in most instances, unless I am working for a builder I will send my customer a full breakdown of the works to be carried out so that they know where I need to be and what I need to do. for example , access to the airing cupboard, access to the loft, access to the gas meter buried in the back of your garage , we will have to run a new gas carcass because.
I know the unexpected will crop up from time to time but then it is down to the installer and the customer to act like adults and work it out. Problem is this is when customers think the tradesmen is trying to rip them off when more often than not they aren't
The above is not a dig at the previous posters as I do see their point but often customers need to look past The cheap costs they find online to what an installer actually has to pay out it's not boiler on the wall job done.
We also have
fittings
pipe
inline descaler
inline filter
Power flush
Chemicals
Materials for making good flue holes
controls to bring in line with Part L
labour
12 month guarantee and follow up for any issues after installing if any
Then on top of it we have admin costs Van
insurance (van, pli)
Yearly accreditation (gas safe)
Renewing accreditation (every 5 years Gas safe, unvented etc)
calibration of flue analyser
Fuel
Labour you don't see like running to and from merchants for all materials for your job
labour after hours registering your boiler correctly with manufacturers and LBC
uniform
no doubt there're obvious ones I've missed but please don't think that everything you're charged over the top of the boiler goes straight in our pocket as it doesn't.