Discuss T4TS plumbing scenarios in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
They seem okay as scenarios to me.

They seem to be picking up on any underlying knowledge required to answer them.

In real life of course it often doesn't work like that.

A Plumber usually has to think on the job, not go home and look in a book.

Its great if you can of course and sometimes you get the opportunity to do so.

Working for small repair companies however, where you don't even know what your next customer will want, it works differently.
If your an employee, your boss will expect you to be able to do what he is paying you for and that means any job in Plumbing.
That means from ships plumbing to oil refinery to tap washers.

You would need a library to cover it all and have the time to read it.

Your head would be so full of information you could probably be so distracted from your often dangerous surroundings you could trip, and hurt yourself.

The key is to do your planning first and then the job, so you don't mix work with learning.

But how do you do that in a small firm when you don't know what sort of job you will be doing in the next half hour let alone day?

Learn as much as you can about how things should work, then you will know why they don't.

And don't be afraid to ask questions or look in kids books for answers.
Have a read of a Physics book, go to one of the junior school websites and learn the basics from the start.

And don't think your too old or sophisticated to do that.

You don't of course have to go down to the sub atomic particle level of matter to understand what your doing, although that helps, but just far enough so that you do understand.

Also what you do sometimes find is that the same principles of Plumbing apply equally to an oil refinery as they do to your house only the pipes are usually bigger.

Wait till you get piece of 24" Spun cast iron to play with. You can get bigger of course, but that is usually the heavy mobs job. :)

You will spend all day trying to work out how to move it, let alone do anything else with it. And no a nice man with a crane isn't always there.

You have to ask "How deep is the hole, its going in?" "Is the hole properly shored up!"

Loads of questions about none Plumbing things that are all part of Plumbing.

Its all a good laugh. And don't forget to relax and have fun at some point. :) :)
 
scenario 2 the immersion has been left on,the thermostat on the immersion is set to high,turn it down to 60 degrees,check everything to do with hot water,
ps i have the completion code should you need it, hope this helps
 
hello can you tell me please
step by step how to do the stupid scenario 2, I done all settings but the hot water check is p..in .a ... help
 
Hey folks if you contact your tutor team you can get a walkthrough guide from them
 
hi mate i dont know how to do soundness test in senario 3
please help me
akh


Im having the same problem now and its getting bloody annoying.

I can do everything in this scenario apart from the Cold and Hot Water Soundness testing. What am I doing wrong

Ive checked absolutely everything (twice!) and Ive even left it for 15 minutes in case but still No!!

It would be nice to get more details from the results rather than 'you did not complete a soundness check on the hot water/cold water' At least give us a clue what we are missing

Can anyone help before I start using the CD as a lethal weapon by throwing it at something?

Thanks
 
Basically, the same as the above. How do i do a full hot water check ?
I've done everything else for scenario 2
 
can anyone tell me where i can get theses cd's ...nothing like this in ireland and i would love to suss it out for the craic !!!
 
can anyone tell me where i can get theses cd's ...nothing like this in ireland and i would love to suss it out for the craic !!!

So would i just incase i have forgotten anything.

Just had a read through some of this............walkthroughs?????????? what is that all about. This plumbing game is far removed from call of duty or what ever other game you get walkthroughs for. Suss it out for yourself.
 
hi all
im also having probs on the soundness testing if any one susses iit please let me know and i willl also

cheers chris
 
Status
Not open for further replies.

Reply to T4TS plumbing scenarios in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Good morning, I recently had an extension, new bathroom and new en-suite fitted. Prior to the works the hot water worked. Now we have moved...
Replies
13
Views
3K
R
  • Locked
Hi, My rather old immersion boiler decided to give up the ghost the other day, notifying the household by tripping the switches at the fuse box...
Replies
12
Views
2K
rflook
R
D
  • Locked
First time posting on here and I am after some help and advice on a project I have ongoing at home - a bit cheeky I know but as they say around...
Replies
3
Views
2K
S
  • Locked
Are you sitting comfortably? Good, now here's a story. Called to a larger property with a big unvented cylinder (Megaflo). About a year ago it...
Replies
10
Views
3K
mountainman
M
M
  • Locked
Hi all. We have had a few issues with our boiler over a couple of years, which I'll try to keep concise. We have a condensing boiler in the...
Replies
26
Views
5K
mountainman
M
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock