Search the forum,

Discuss Some advice on two different problems please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
room stat he is asking mate
 
is your thermostat sited above a radiator or any heat source?

No, this is why it was moved in the first place since it was in a corner in the lounge near to a radiator. It got moved upstairs on the landing not near any heat or cold source.
 
landing isnt a great place as heat rises. best place is the hall, shouldnt give you the probs you are usggesting though, when does it 'click'?
 
If I turn it on first thing in the morning in this current weather (starting to get colder) I gradually turn it and it will click on at around 25/26 c

I think the knocking may have gone away! Touch wood.
 
if it is clicking at 25/26c then it suggest your house is around that temp, thats hot!!!!!!!!!!!!!!! is it hot? if not then the stat itself could be the problem
 
No house is not that hot. Had the stat replaced already supposedly, and got it moved location. Still the same.
 
well it must be faulty if it clicks at that temp but its inacurate
 
Status
Not open for further replies.

Reply to Some advice on two different problems please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
128
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
280
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
2
Views
60
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
52
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock