Search the forum,

Discuss Some advice on two different problems please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
room stat he is asking mate
 
is your thermostat sited above a radiator or any heat source?

No, this is why it was moved in the first place since it was in a corner in the lounge near to a radiator. It got moved upstairs on the landing not near any heat or cold source.
 
landing isnt a great place as heat rises. best place is the hall, shouldnt give you the probs you are usggesting though, when does it 'click'?
 
If I turn it on first thing in the morning in this current weather (starting to get colder) I gradually turn it and it will click on at around 25/26 c

I think the knocking may have gone away! Touch wood.
 
if it is clicking at 25/26c then it suggest your house is around that temp, thats hot!!!!!!!!!!!!!!! is it hot? if not then the stat itself could be the problem
 
No house is not that hot. Had the stat replaced already supposedly, and got it moved location. Still the same.
 
well it must be faulty if it clicks at that temp but its inacurate
 
Status
Not open for further replies.

Reply to Some advice on two different problems please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
225
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
242
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
244
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock