ideal logic help please

[rsfido_1989]

hey everyone, after a bit of advise... fitting the ideal logic boilers (a love / hate boiler.. easy to fit but reading about them not a great boiler), the only problem i have found while looking at them is how do you do the gas analysis? the little black cap at the top is tiny so my standard gas analyser does not do into it! any help will be great.
Thanks

 

[aggis]

You have to use a rubber u guage tube or spare air pressure tube to connect most Ideal boilers.

 

[rsfido_1989]

but how will that enable me to use a flue gas analyser probe?

Testo 300 M Rauchgas Analysegerät inkl. Drucker usw. bei eBay.de: Mess- Prüfwerkzeuge (endet 17.11.10 22:36:41 MEZ)

this is the same as what my boss has.. old but still good...the probe is exactly the same.

thanks

 

[PaulGas]

You fit the rubber tube over the test point and then over your analyser with the other end

 

[rsfido_1989]

ah. cheers for that ... will give that a go