Help needed with 1970s waste pipe

[doppiooo]

Hi
When changing a basin in a newly aquired old bungalow I had a problem as I came up against the cold supply being in Poly-York 17mm pipe. The hot was copper. Well I have overcome that problem hopefully by getting fittings 3/8 to 15mm which are Peglar Yorkshire PL140. I am adding this information in case anyone has this same problem.

The probem I have now is the waste from this basin measures measures 1-3/8'' o.d. and is a kind of bronze looking plastic. Can anyone please advise me if this can be joined with one of todays waste pipes?

 

[buff]

you might be better just replacing it all
bob

 

[tamz]

Bartol coppertone. It is the same size as any other pushfit. If you are stuck use a multifit union.

 

[doppiooo]

I would like to replace it but its in a pretty hard to get place, but i havent completely ruled it out yet. It certainly sounds like this waste pipe is Bartol Coppertone as this is exactly how it looks. I have not heard of a multifit union bot that sounds a good option.
Thanks for your advice

 

[tamz]

A plastic compression. Have a look here
http://www.mcalpineplumbing.com/productitemlist.asp