Discuss Plumbing works whole house refurb in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
Hi guys. This job is near reading. It is to do a couple of bathrooms, move boiler, move tanks in loft higher and put cylinder in loft. Possibly put in an unvented cylinder as mains pressure and flow off the chart.

A bit too far for me but it is for my wife's friend.

Screenshot_20180319-132740.jpg
 
A nice bit of work there for someone. Nice of you to offer the opportunity on here.
 
Status
Not open for further replies.

Reply to Plumbing works whole house refurb in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Pumps and low pressure I moved the bathroom to the back the house (next room) upstairs. I put in two pumps because low pressure water area. One...
Replies
1
Views
303
Hello, and thanks for taking the time to read. I'm trying to work out if the idea I have is practical? The water pressure in my newly renovated...
Replies
3
Views
448
We have a gravity fed hot water system in our the house we have just recently moved into. It works fine with the downstairs shower, however we are...
Replies
15
Views
792
I'd like to install an unvented cylinder in the loft. With limited headroom it would have to be horizontal. I want to keep my existing valiant...
Replies
10
Views
2K
Hi all. As the title says, I have a problem with an unvented cylinder I had installed last year where the first time I turn a hot tap on after the...
Replies
27
Views
2K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock