Search the forum,

Discuss help please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

bewildered

I am getting quotes for a new gas boiler.Far from being, as I expected, choosing the installer I felt comfortable with who provided a competitive price I am getting conflicting advice as to the installation.Some say a combi others a regular the makes vary ,Veissmann, Vaillent W Bosch and Glow worm have all been suggested also position Kitchen ( which I prefer not to have ) basement (where the present Potterton Kingfisher is situated ) or a laundry room next to the kitchen .Also a flush is advised by a couple and advised against because the system is old by another. I have no way of knowing what to decide . The house and present installation is old the house is big but only 2 people live here at the moment but if we move it would become a family house again.
Help please
 
Depends on what you want it for and how much hot water you use. Basically your options are a combi or a system boiler with unvented cylinder. If you are having hot showers, and if it is a larger house, the system boiler may be more suitable. If you do get a combi, make sure it is not undersized for the size of the house and for any showers you may have.

The best location for the boiler needs to be easy access for maintenance, ease of getting the condensate away, and convenience. Ventilation is also an issue but if against an outside wall you can have a balanced flue.

The Building Regs state that the system should be flushed before a new boiler is fitted, so this should be part of the installation. I wouldn't put a new boiler in without doing so. Unless your system is really decrepit with rusty radiators you should usually be OK. The flush will remove any sediment in the system which you would not want to contaminate a new boiler. Those brands are pretty reliable. Viessmann is probably the better one. Worcester Bosch are reliable (Potterton is best avoided).
 
Last edited:
The house and present installation is old the house is big but only 2 people live here at the moment but if we move it would become a family house again.
I take it the family has flown the nest.

You have to decide whether to install a system which is suitable just for two people or for the potential occupation of the house. If you intend moving shortly, it's probably worth doing the whole job; it will make a good selling point.

How many bathrooms and showers are there? If more than one, you should not be considering a combi boiler.

Installers' favourite boiler makes is a regular topic and you will never get a satisfactory answer. On the whole continental manufacturers have a better reputation than the UK ones.

Location is up to you, some will be be easier and cheaper. The problem with cellars is the flue, which has to be brought up through the floor and out of the wall at the correct height. If you don't want the boiler in the kitchen, the laundry room sounds a good compromise.

Also a flush is advised by a couple and advised against because the system is old by another.
Do all the rads heat up OK? Do they feel evenly warm all over the rad?

If the answer to both of these is yes, you probably do not need a power flush. It would be a good idea to drain and refill the system until the water runs clear. Then refill adding one or two cans of Sentinel X400 cleaner. This can be left in until the boiler is replaced, when it will be drained out by the installer.

If the installer suggests a sealed system, ask him to do a pressure test first. This will show if there are any leaks in the system.
 
thank you for replies. It looks as though both combi and system boilers are suitable . Are there any advantages to either one ? Reliability is my first concern ( I think ! )
 
Status
Not open for further replies.

Reply to help please in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
302
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
339
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
245
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock