M
maarksparky
Hi folks,
Newbie on the forum so please help..
I have a two bedroom flat with an Electric Immersion Boiler/Water heater which is only used for hot water. No Central heating etc..
I have replaced a mixer tap in the bathroom since, previously I had two separate taps hot and cold.
After I replaced the taps to mixer, there is no hot water coming through the hot side. I feel as though the cold water is going into the hot water pipes through the mixer as Immersion boiler doesnt have a good pressure...
I have tried putting a non return valve on both the cold and hot pipes to the sink (which reduced the pressure on both sides) but still the problem exists..
please advice guys, would really appreciate your help..
Newbie on the forum so please help..
I have a two bedroom flat with an Electric Immersion Boiler/Water heater which is only used for hot water. No Central heating etc..
I have replaced a mixer tap in the bathroom since, previously I had two separate taps hot and cold.
After I replaced the taps to mixer, there is no hot water coming through the hot side. I feel as though the cold water is going into the hot water pipes through the mixer as Immersion boiler doesnt have a good pressure...
I have tried putting a non return valve on both the cold and hot pipes to the sink (which reduced the pressure on both sides) but still the problem exists..
please advice guys, would really appreciate your help..