Search the forum,

Discuss Water filter tap from Mains or from kitchen Tap supply? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
11
Is it better to go directly from the mains for a water filter tap or from the cold water running into kitchen tap. Is it cleaner from the mains line and ready to drink quicker?

The water line runs from the main to the tank upstairs and back again for the rest of the house. Also splitting from the mains is the outside tap connection.
 
It should only come from the mains , it must not come from a tank
 
It goes up where the tank is located to one of those cold water combination valves then to the rest of the house.
 
Tank or cylinder? Sounds like you mean you have an unvented cylinder and the cold to the taps is T'd after the pressure has been reduced after the combination valve for equal pressures between hot & cold.

If this is the case, it can still be T'd into the cold pipe going to your tap as it will be mains water. Just reduced.

---

However, if you do mean tank, the cold water comes into house, feeds 1 or 2 outlets (tap & outside taps or boiler) and then goes up to a cold water storage tank and then comes back down and feeds the rest of the taps (indirect cold water). Then you cannot T into it if it comes from the cold water storage tank.
 
Sorry I seem to call it a tank force of habit, but yeah you are right, Ant I meant to say an unvented cyclinder. Would it be better off the mains it terms of cool water ready to drink, rather waiting for the cool water to run.
 
The water coming back down from by the cylinder is still cold mains, it's just been reduced through a reducing valve.

A combination valve has a filter, check valve, reducing valve and pressure relief.

As this is the case, I'd install the tap and connect to cold water however easier. What's closer. Whether that be cold mains going up to the cylinder, or the reduced that comes back down.

When we sure to have a filter tap we used to have to run it a minute anyway to let it get colder.
 
Cheers Ant great help. Connection wise both are similiar in terms of ease. The reason I was asking is my thought process was that, the water coming back down is subject to higher temperature sitting in the pipe by the cylinder upstairs and possibly take longer for the cold water to bleed through.
 
@spintop, I'd imagine it only to be marginal though? I tend to find our mains cold can differ in temp too depending on the day, haha.
 
Status
Not open for further replies.

Reply to Water filter tap from Mains or from kitchen Tap supply? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I live in an apartment block where generally hot water is supplied from the communal hot water cylinder and cold water to bathrooms is supplied...
Replies
4
Views
620
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
185
M
Hi, I woke up this morning with cold water (mains) from downstairs tap but no hot water from downstairs tap, and no water at all from all the...
Replies
0
Views
243
Mike Young
M
A
Hi, I am replacing a kitchen tap and have run into some trouble when connecting the flexi hot and cold pipes to the hot and cold mains pipes. The...
Replies
0
Views
248
Adam tl
A
Hi everyone, I turned my cold water feed off in the airing cupboard which supplies only cold water to my bathroom but it also turned the water to...
Replies
3
Views
464
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock