Search the forum,

Discuss Megaflo Eco 145I Indirect in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

A-W-S


Megaflo Eco 145I Unvented Indirect


------------ For Sale ------------


This is a brand new unit, never installed, still in the unopened box, this is the wrong model for my house, I need a larger one and so now this is surplus. I am looking for a very reasonable price for this brand new cylinder as it is taking up quite a bit of space. £860 paid for the unit, but as said, I am happy to listen to offers. It is currently located in Faversham in Kent.


Model 145I
Nominal Capacity (Litres) 145
Recovery Time (mins) 17
Element Rating 1 x 3kW
Coil Rating 18.7kW
Heat Loss (per 24 hours) 1.32kWh
Empty Weight 35kg
Full Weight 204kg
Typical Installation 3 Beds, 1 Bath, 1 Shower


If interested please contact me
[email protected]

Cheers
 
Status
Not open for further replies.

Reply to Megaflo Eco 145I Indirect in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, We moved into our current home 18-months ago and the following heating/ HW system was already in place: Worcester Bosch 24i system boiler with loft water tank and ancient cylinder (c.100 litre capacity). This looks after 17 rads and two bathrooms. In order to improve water pressure in...
Replies
22
Views
8K
Hi All. I am refurbishing a house i recently bought. It would have 4 shower rooms and 6 vanity units in the bed rooms plus kitchen tap and a tap in utility room plus if i conver the loft into living space it need to be future proof to add one more shower room. Total radiators would be 16-17 in...
Replies
14
Views
2K
Hi, some professional advice would be greatly appreciated, We are having an Unvented Cylinder installed into our 2 bedroom ground floor flat. I have had a few quotes and been given lots of differing advice, this always makes me wary, especially having suffered a history of poor quality work by...
Replies
17
Views
9K
Hi All, We are experiencing some problems with both our Showers in our home. We have two Showers - in the upstairs bathroom & in a wet room downstairs. They are both connected to a Worcester Bosch 35Cdi Combi Boiler (older version) which gets regularly serviced every year. In our upstairs...
Replies
15
Views
3K
D
  • Locked
I have a Heatrae Sadia Indirect Megaflo CL 125 L HE which has 2 3kw immersion heaters installed. I'd like to put the heater on a timer but most timers are only rated for a 3kw load. Does anyone know where I can find a timer that can handle a 6kw load? Rgds Dave H
Replies
3
Views
4K
DaveH
D
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock