Search the forum,

Discuss Bubbling toilet in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
D

Dom38

Hi could any one explain as to why when I empty the bath or basin the toilet starts to bubble up the toilet flushes fine?
 
mmmmm not heard of a bubbling toilet before, depending on the layout of the waste system in your area, maybe you have a drainage problem and the waste water is being forced back ? so to start with maybe you could try looking in the nearest drain cover and see if you have a good flow or any build up of waste in there? is this a new problem ?

i know somtimes when you pull the plug on the bath you may get a gurgling from the basin (or visa versa) which is the trap being siphoned
 
sounds like small blockage somewhere. look in nearest manhole check for good flow, also put some toilet paper down toilet and flush. check to see if you see paper come through at manhole. thats if manhole not full to start with
 
yep it does sound as though there is a blockage somewhere on your waste distribution can't offer any more advise as you have been given the gist of it.
 
Status
Not open for further replies.

Reply to Bubbling toilet in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
391
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
163
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
223
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
255
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
398
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock