Search the forum,

Discuss Pressure question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

arty21

Hi all.

Can anyone lead me in the right direction to answering this question?

A cold water pipe has a tap attached over a sink. The standing pressure in the pipe is 3 bar average. When the tap is open the pressure decreases to, say, 1 bar. When the tap is closed suddenly does the pressure increase to above the standing pressure or does it return to 3 bar?

I know its a silly question but my appresntice asked the question and its a long time since I took my c&g and cant remember the answer.

Thanks for the help

Arty21:confused:
 
Well we have a pressure and flow situation here
The answer is not straight forward as you would expect from an apprentice
You have two options to this question
1.You can clip him around the ear and tell him not to be so impertinent, asking silly questions :)
Or
2. Explain it depends on speed of flow, presure and how fast you turn the tap off
If you have standing pressure of 3 bar that is the pressure that will be in the pipework when tap turned off after any effect of turning the tap off fast has been dispersed
Will or could the pressure go above the standing pressure if tap turned off
Yes it could
But, if it will or by how much depends on what pressure is present when tap is closed, what speed the tap is closed, at what speed it is flowing and the surface area of the tap washer on the tap
Basically, you have the pressure of the water flowing through the tap but that pressure will be increased by the speed/force the water is travelling through the tap when closed
As the force pushing the water through, if stopped suddenly, has to go somewhere and it is transferred into pressure
Then there is how quick the tap is closed, the quicker closed, the more of the flow force can be converted to pressure in the water
Then there is surface area of washer to absorb any of the flow pressure
Then send him away to find the calculations involved, whilst making you a nice tea,
as he should be doing in the first place :D
 
Last edited by a moderator:
tell him to bugger off and do something usefull he sounds far to clever to argue with
 
Hi Suggest he looks at the "hydraulic ram" for guidance. Is a device that allow water to be raised above the level from which it come. The energy that allows this comes from the water its self, no other energy required.
 
Status
Not open for further replies.

Reply to Pressure question in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I'm looking for a water pump to pump water from a storage tank at a constant 3 bar pressure. It's at a campsite I run that's at the bottom of...
Replies
2
Views
100
I have been facing central heating low pressure on unvented hot water RM Cylinders but can't see any leak on the PRV, expansion vessels and...
Replies
2
Views
486
losing pressure
L
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
310
Hi I've got water hammer issues with my cold feed and some with the hot feed. When the cold sink tap, cold bath tap and thermostatic shower in...
Replies
1
Views
448
I live in an apartment and have a cold water tank in it. The cold water tank feeds the cold water tap in the sink and the bath. Recently, I...
Replies
11
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock