Search the forum,

Discuss Boilermate 2000. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

Thorpe

Hi,
I have a Wimpey Home BoulerMate 2000 system but the problem I've
had for a long time is if your using the water in one situation like a shower and
someone runs the tap or puts the washing machine on the water comes out
at a trickle which is ridiculous as its a 5bed house and has 3 showers
It also alters the water temperature,
Can any one answer Why !!
 
Either scale if your in a hard water area or undersized pipework or not enough pressure and flow.
 
If same happens with cold taps then it is pressure and flow rate of supply, but if cold taps OK then suspect scale, as above. Heat exchanger and blender easily accessed.
 
Rip the boiler mate out and put an unvented in. You won't regret it they are nothing but problems and expensive to fix
 
RUN AWAY !! Haha I don't touch them had fingers burnt with these and if I see one in a customers house I tell them to start saving rubbish manufacturer doesn't even want to touch them
 
Status
Not open for further replies.

Reply to Boilermate 2000. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, Just looking for some advice if anyone has worked on a boilermate 2000 try to condense the story, Lived in our home 3 years with the system working fine, but 2 days ago hot water stopped. From research it now looks like the past owner already had a problem. They have changed the...
Replies
0
Views
889
M
Hello, We’ve recently moved into a fairly old, fairly big detached house (i.e. fairly draughty, but not too bad by any means) with a fairly new well maintained Worcester combi boiler. We weren’t convinced the heating was working right and then got hit with a £610 energy bill for the first 6...
Replies
0
Views
257
MartinPod81
M
Hello, bit of a noob question but would someone be able to help me to understand the pipes coming off our boiler. It's a Grant oil combi boiler, and where the pipes come in is in a room at the front of the house. I am about to box them in but I really wanted to understand what the various pipes...
Replies
9
Views
638
We have just moved in to a 1934 Semi- and I am getting round a few simple DIY tasks, including a couple of plumbing-part renewals such as modern pipe/u-bend/fittings to kitchen sink, rinse sink etc as preventative maintenance! Nothing complex or specialist, that's for you expert guys! But in...
Replies
8
Views
579
Hi All, We have finally decided after a bit of a persuasion to have installed a utility room in our garage that currently houses our oil boiler. Initially we thought the boiler may stay in place but after discussions with the builder we would have to move the boiler to replace the floor and...
Replies
7
Views
837
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock