Discuss Testing a capacitor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Bunker

Can anyone advise me how to do this? Strangely Ive not replaced one before (plenty of motors). I know the microfarads rating is on the side of it but, and please excuse the question....wth is a farad? I know you test it on resistance but whats the procedure please?
Fank ooo.
 
Last edited by a moderator:
You need to de energise it by putting a long screwdriver across it to a earth point. if you don't de energise it you could get a serious shock.
 
First discharge it as Rob has stated

Then put your multimeter across the pins setting it in the high ohm range 10k-1m

Should start at zero and then move toward infinity, if it doesn't the capacitor is knackered.
 
And then what Rob...?

Sorry thought it already been explained in previous posts. aye just decharge it and put multimeter on ohms scale if you get OL then its gubbed, if you get less than 10ohms it has a short circuit.
 
the ohms scale will tell you if you have short or open cct capacitor.
go to somewhere like maplins and buy a tester with the farad measuring scale.
most capacitors i test are from 10 to 60 micro farads.
they can carry a charge as stated above and store it for weeks so always be wary of the buggers.
set multimeter to farad scale, put both probes on the cap terminals, wait for the beep and check the readings.
 
Status
Not open for further replies.

Reply to Testing a capacitor in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, Firstly i feel really dumb asking such a amateurish question so please be nice as i feel i have to ask for clarification i'm working...
Replies
11
Views
182
Hi all, a little advice and validation of current advice (from dad). So boiler has been loosing pressure with an error code of E119. The pressure...
Replies
11
Views
2K
Hi, some professional advice would be greatly appreciated, We are having an Unvented Cylinder installed into our 2 bedroom ground floor flat. I...
Replies
17
Views
9K
  • Locked
I need as much help as possible from you guys. im currently in my apprenticeship. Unfortunately my journey man doesn't do a lot of or teaches me...
Replies
7
Views
154
N
  • Locked
Hi, think we have a flow problem in our central heating....but don't know how to tackle it.. We've an old CH system, which was installed before...
Replies
2
Views
3K
Back
Top