Search the forum,

Ideal Mexico 2 Super CF 41-429-45

Post new thread

Discuss Ideal Mexico 2 Super CF 41-429-45 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

CMairiD

Anyone have an electronic copy of this manual? Should note the engineer has listed it as Mexico 2 40 CF but online searches are pulling back Mexico 2 Super CF 60P.
 
no why are you having problems or need to clarify mi,s?
 
Doing gas servicing tomorrow (as a trainee with a registered engineer) and we are going to this boiler. Would quite like MIs to hand.
 
If you have the manual for a 60P it is more or less the same thing ( P means propane)
They were all made the same 40 through to 140 only difference being more sections and the burner(s).
You will get the burner pressure from the data plate on the base of the boiler.
 
Status
Not open for further replies.

Reply to Ideal Mexico 2 Super CF 41-429-45 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
170
John.g
J
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
501
FozzieBear
F
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
288
oz-plumber
O
M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
290
Matt0029
M
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
161
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
British Standards in Tiling BS5389
Tile News
Tiling News
Contractor Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock