Combi boiler for a 4 bathroom house - Advice please

[Centralheatking]

Combi in this set up no way - but hey sorry Francy its you 1st post please introduce yourself and join our society please - you are really welcome . We are kittens really but watch out for CRoppie - he is industrial - thats what his MRs told me ! CHK

Not if the right combi is installed the right way[/QUOTE]

 

[Ermintrude]

Give ACV a call, get rep to come and see you also get ideal or oso to give suggestions once ACV have given design. The 85 tc will do fine on 20mbar. Will possibly need upgrade on size if meter is a way off?

 

[Centralheatking]

Your project is way beyond any cowboy outfit, and might defeat some one only set ups.

As you are 5 hours South of us I would contact Ray Stafford about who could handle this
contract that comes into his shops CHK

Already have large cold water tank up there, but dont know if loads are different in other parts of the loft.

Am interested in getting other quotes from appropriately registered members. In terms of quotes, for kind of installation I have in mind (wishing to meet building regs etc with anything I do) what registration would you advise I look for.

Wont just be the boiler change, but removing old system, rerouting pipework where necessary. Putting two toilets in connecting to close by 1ft away soil pipe (no connection currently in). At least one shower with no current connection in place nor water supply to room. Another shower where I may (depending on where stairs end up) be able to connect to current supply feeding the existing sink. Maybe a few extras.

Another question: -

Cost of decent cylinder (in loft) and decent boiler possibly ground floor probably will be around the 1.8k+ mark with installation cost additional.

Providing ACV 85tc could be connected to standard domestic supply for gas and water (enquiring with ACV re regs) with it being one compact unit would installation and connections be easier from plumbers point of view (and therefore install cost) likely to be far less? Would go in a place that adjoins outside wall for outlet for any necessary flues.

Still got some reseach to do on this one, if on ground floor would reaching the loft with water supply hinder performance, read a few things about not being able to put pumps on pressured unvented systems?


Thanks

 

[Dotty]

Timmyjane (Miss?)

As CHK inferred this is an interesting project and one you really, really need a good guy to do. Get a few quotes and come back to us with the proposals being made, we can give you our views bearing in mind we haven't had eyes on the job.

you couldn't do any worse than posting a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

 

[Howsie]

We are always happy to provide you with an estimate or just chat through your options.

 

[timmyjane]

Hi - the unit I initially enquired about is a combination unit in essence! but it does have a 170 litre water store so does have the facility to have 170 litres of heated water before I have to rely on the instant heat facility. It is also one of the most efficient boilers on the market as it condenses (reuses the waste heat from both water and central heating system). A tank in tank sytem meaning gas used and cost to heat therefore less I think. From all I have read it seems to have the capacity for a decent flow rate 46 litres a minute providing I have a good water pressure and inflow rate. It will also take up less space than a decent boiler and good capacity tank, with possibly less install cost if it can connect to domestic supply (gas pipe 5 ft away from where I may install it).

So is it a hybrid that comes up with a good solution to space problems, not sure, but not willing to just discount it as its classed as a 'combi'. Any combi without such a hot water store in my limited opinion so far would not work just based on flow rates quoted on standard ones. It seems to stand to reason if something quotes (as most standard combis do) it is able to heat and release water at between 10 and 20 litres a minute then it probably will not allow me to run the dishwasher in the morning, kids to be washing faces in sink me husband and lodger in the shower all at the same time in the morning without some kind of compromise.

So at the moment not discounting (what appears to be a good hybrid solution) as advice is clearly mixed on this one. Issue is potential price.

Thanks for advice so far, all been great.:vanish:

 

[Gray0689]

Hi - the unit I initially enquired about is a combination unit in essence! but it does have a 170 litre water store so does have the facility to have 170 litres of heated water before I have to rely on the instant heat facility. It is also one of the most efficient boilers on the market as it condenses (reuses the waste heat from both water and central heating system). A tank in tank sytem meaning gas used and cost to heat therefore less I think. From all I have read it seems to have the capacity for a decent flow rate 46 litres a minute providing I have a good water pressure and inflow rate. It will also take up less space than a decent boiler and good capacity tank, with possibly less install cost if it can connect to domestic supply (gas pipe 5 ft away from where I may install it).

So is it a hybrid that comes up with a good solution to space problems, not sure, but not willing to just discount it as its classed as a 'combi'. Any combi without such a hot water store in my limited opinion so far would not work just based on flow rates quoted on standard ones. It seems to stand to reason if something quotes (as most standard combis do) it is able to heat and release water at between 10 and 20 litres a minute then it probably will not allow me to run the dishwasher in the morning, kids to be washing faces in sink me husband and lodger in the shower all at the same time in the morning without some kind of compromise.

So at the moment not discounting (what appears to be a good hybrid solution) as advice is clearly mixed on this one. Issue is potential price.

Thanks for advice so far, all been great.:vanish:

What is the boiler make & model?

 

[timmyjane]

What is the boiler make & model?

ACV HeatMaster Gas Condensing Combination Boiler 85tc. Also do a 35tc which is a littler smaller but does not have comparable flow rate.

 

[Gray0689]

ACV HeatMaster Gas Condensing Combination Boiler 85tc. Also do a 35tc which is a littler smaller but does not have comparable flow rate.

Lol sorry thought you was on about another boiler

 

[timmyjane]

Lol sorry thought you was on about another boiler

You thought early on this would do the job, now you know the specific model, is opinion still good if I can bear cost?