Search the forum,

Discuss What's happened with Tapatalk and RGi section? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

ed209

I cant log on to Tapatalk anymore and cant find or access RGI section anymore
 
Didn't Dan say the forum doesn't support tap talk any more and was removed from the forum
 
Yeah there are a few threads about it. We've stopped using Tapatalk the forum its self works better and has more features and things.

Also Tapatalk were doing a lot of data collecting and whatnot. Don't comply to the same laws as us with being Chinese.

And emailing our members themselves when you haven't agreed to that.

Not to mention it not being compatible with a lot of the new stuff we will be doing like the 'find a trader' type website and things.
 
If you pm me your gsr number l sort out your access
 
Status
Not open for further replies.

Reply to What's happened with Tapatalk and RGi section? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Rad is only a few years old. Paint is flaking away at the top curved section and it looks like faint spots of rust where the rad is now bare.
Replies
3
Views
226
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
215
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
1
Views
42
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock