Search the forum,

Discuss What's happened with Tapatalk and RGi section? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

ed209

I cant log on to Tapatalk anymore and cant find or access RGI section anymore
 
Didn't Dan say the forum doesn't support tap talk any more and was removed from the forum
 
Yeah there are a few threads about it. We've stopped using Tapatalk the forum its self works better and has more features and things.

Also Tapatalk were doing a lot of data collecting and whatnot. Don't comply to the same laws as us with being Chinese.

And emailing our members themselves when you haven't agreed to that.

Not to mention it not being compatible with a lot of the new stuff we will be doing like the 'find a trader' type website and things.
 
If you pm me your gsr number l sort out your access
 
Status
Not open for further replies.

Reply to What's happened with Tapatalk and RGi section? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
166
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
300
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
222
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
207
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a small leak from the brass body which can be unscrewed. Is there a seal behind the body? Thanks.
Replies
2
Views
280
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock