Search the forum,

baxi system 60/100

Post new thread

Discuss baxi system 60/100 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
T

turnerl1987

hi can anybody help me, i have a baxi system 60/100 boiler and the fan and flu light came on so i replaced the fan and air pressure switch it still wasnt working so i put a new pc board on and it fired up fine but the water was only getting hot up to 50 degrees, could this be a faulty pc board or a underlying problem, look forward to your answers as a matter of urgency (very cold house) thanks lee.
 
no hes not he is paying lots of money changing parts because he is clueless call in a gsr mate your out of your depth
 
Status
Not open for further replies.

Reply to baxi system 60/100 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
496
FozzieBear
F
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
251
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
362
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
208
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum
Tile News
Tile Talk
Plumbing Advice
Tiling Forum UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock