Search the forum,

baxi system

Baxi is part of BDR Thermea, one of Europe's largest manufacturers and distributors of domestic and commercial water and space heating systems.
Baxi employs 6,400 people throughout Europe, with a turnover exceeding €1.2 billion. The group has significant market shares across all major continental territories and in the United Kingdom. It is also expanding into new markets such as Romania and Argentina and already has a direct presence in Russia, China and Czechia. It has a presence of joint venture partnerships in developing locations, like Turkey.
Today, BDR Thermea owns and sells some of the leading brands in the European market for heating products.It is known under various pseudonyms worldwide, including Chappée and Ideal Standard in France, Roca in Spain, and Broetje in Germany.
Baxi operates four sites in the UK: Warwick, Preston, Norwich and Wokingham. There are also numerous training centers nationwide, including Dartford and Godmanchester.
Its investment is based on boiler products and renewable technologies, including solar thermal hot water systems, ground source heat pumps, air source heat pumps, biomass boilers and micro combined heat and power with baxi-innotech.

View More On Wikipedia.org
Recent contents Top users
  1. S

    Baxi Ecoblue System Boiler Weeping from Drain Plug

    Hello everyone, Baxi Ecoblue System boiler which was recently serviced just before Christmas. There has since been a constant but slow drip coming from the black nylon plastic drain plug at the back of the boiler which is accessible from the underneath. It does not appear to be from the thread...
  2. R

    Advice on Flow and Thermastat

    I live in a very cold 3 bed detacthed house. We have a Baxi 400 heat only boiler and use Tado smart thermostat and controler to replace the old honeywell programmer. Pump is a CirculatingPumps CP50. The boiler flow temp is set at 75c and the thermistat is at 21c but it is not warm enough and...
  3. E

    Baxi System Boiler Weather Compensation

    I'm wanting to install weather comp on my Baxi Platinum+ system boiler (GC No: 41-470-95). This is because the house is heated using underfloor heating which is mixing down to 35c but the boiler is set to 70c to heat the unvented cylinder up to 60-65c. The idea is to select a curve more suited...
  4. I

    Baxi system boiler and Opentherm

    Hello Does anyone know if its possible to connect an Opentherm thermostat such as a Nest to a Baxi 800 System boiler. I know its possible with a Baxi 800 Combi but I cannot find any information on achieving this with a system boiler. I wondered if its possible to control the radiator flow...
  5. C

    Baxi system boiler

    Apologies if this is posted to the wrong forum. I have a Baxi Solo HE system boiler, which constantly goes into fault mode, boiler will start up just fine, but once the system reaches steady state, boiler goes into fault mode when the thermostat calls for more heat. actually boiler ignites then...
  6. R

    Sponsored thread - FREE 210 or 250 Unvented cylinder with Baxi system boilers

    Blinkin' flip! as Masood would say. Yep, its true. Buy an 18kw Baxi MainEco system boiler for £549 plus VAT and we will give you, absolutely free, a brand spanking new RM Stelflow 210 indirect unvented cylinder, worth £399 + VAT. Buy a 24kw Baxi MainEco system boiler for £599 plus VAT and we...
    • Ray Stafford
    • Thread
    • baxi baxi system boiler boilers cylinder free oil system thread unvented unvented cylinder
    • Replies: 19
    • Forum: Plumbing Jobs | The Job-board
  7. S

    Baxi System 35/60 Fan issue

    Morning Ladies & Gents, i went out to a Baxi 35/60 System boiler the other week it sounded like a plane taking off. Instinct was fan failing and boiler hunting so changed the fan after a quick call to Baxi Technical. got called back a week later even though silent running when I was...
  8. B

    baxi system 18c ga on a vented system

    i have a gas fitter coming to fit a baxi system 18c ga for me. its an unvented boiler. my cylinder is vented. he said i would have to get a new cylinder so its unvented. is this correct? or can he use the existing one?
    • beat275
    • Thread
    • baxi baxi system capping cylinder heating indirect primatic system vented
    • Replies: 6
    • Forum: Plumbing Jobs | The Job-board
  9. M

    Baxi system boiler is begining to not work! Intermitently...

    Hi all! I've a Baxi system boiler feeding my DHW and CH. It's a sealed system. two channel programmer, valves, etc. Essentially an S-plan set-up. I came in the other day and there was no hot water. It is timed for an hr a day through the programmer so there is always a tank of hot water. So...
  10. M

    Baxi system 35/60 boiler wont fire

    Hi Baxi System 35/60 boiler Used to work ok in warm weather but as its got colder last winter and loft (where boiler is) got colder it needed the loft to be warmed with a fan heater to help it fire. Got a lot worse this year and needed the fan heater pointing at the boiler before it would...
  11. P

    Baxi System 35/60 pump light on, pump running

    Hi Everyone I am new to this forum and am in need of a bit of advice. I have a customer who's boiler lights up ok then when the boiler stat shuts down it will not fire up again.... the pump is running and the water circulates perfectly the pump light comes on and thats it, the fan doesn't...
  12. S

    help pls!

    baxi system 100 plus fires then one min later keeps cutting out. is is heat exchanger??
  13. T

    baxi system 60/100

    hi can anybody help me, i have a baxi system 60/100 boiler and the fan and flu light came on so i replaced the fan and air pressure switch it still wasnt working so i put a new pc board on and it fired up fine but the water was only getting hot up to 50 degrees, could this be a faulty pc board...
    • turnerl1987
    • Thread
    • air baxi baxi system boiler cold gas gas safe hot parts pressure problem safe switch system water
    • Replies: 2
    • Forum: Plumbing Jobs | The Job-board
  14. T

    Baxi System Boiler 35/60

    Hi all - First post so please be kind. I have a problem with my Baxi System Boiler 35/60. In cold weather, the flames don't ignite so don't get heating or hot water. To get around the problem last winter I set up a fan heater to turn on with a timer switch 10 minutes before the boiler was...
    • TINO
    • Thread
    • air baxi baxi system boiler boiling central heating system cold cold weather heater hot hot water loft oil pipe pipes pressure problem switch system system boiler tank water winter
    • Replies: 1
    • Forum: Plumbing Jobs | The Job-board
  15. U

    Baxi System 100 HE Plus

    Hi there all... Im having a problem with the fore-mentioned boiler... Firstly, I was called to a customers house who had a overheat problem... Having realised the high limit stat sited on the side of the fan unit was breaking continuity I sought advice from baxi tech (as I had no previous...
    • uplandsplumb
    • Thread
    • baxi baxi system boiler boilers burner costs high hot overheat paperwork plumber plus pressure problem replacement screw smell system trap
    • Replies: 9
    • Forum: Plumbing Jobs | The Job-board
  16. D

    Pump Continues to run

    Hi, everyone. Just discovered that when i swhich all the heating controls to the off position, the pump continues to run. Any ideas how i can resolve. Thanks in advance David :confused:
    • DavidW
    • Thread
    • baxi baxi system boiler boilers central heating system combi control copper gravity power problem pump switch system tank test valve valves wall water y plan
    • Replies: 10
    • Forum: Plumbing Jobs | The Job-board
  17. M

    baxi system 35/60 problem

    I am having a problem with a Baxi system 35/60 and would appreciate some help.Flow switch spindle does not always come out fully to make the microswitch.This only happens when the boiler has been off overnight and tries to start at 7am. Changed the rubber diaphgram, chaneged the pump as it was...
    • Malty
    • Thread
    • baxi baxi system boiler central central heating system check valve cleaning filter flow head high pressure problem pump rubber switch system valve valves
    • Replies: 2
    • Forum: Plumbing Jobs | The Job-board
  18. M

    Hello and help with Baxi 35 60 flowswitch problem

    Hi to Everyone on the forum. I only discovered it today and joined immediately, it looks very impressive! I am having a problem with a Baxi system 35/60 and would appreciate some help.Flow switch spindle does not always come out fully to make the microswitch.This only happens when the boiler has...
    • Malty
    • Thread
    • baxi baxi system boiler central central heating system check valve flow gas hello help inside plumbers plumbing problem pump rubber switch system valve
    • Replies: 3
    • Forum: Plumbing Jobs | The Job-board
  19. M

    Maltman

    Recomended an ecoMax 613/2 to a customer that was reduced to £150 at City Plumbing .Went to fit it today and took out an old Baxi system boiler balanced flue bricked up the hole in the snow but reading the instructions it says its a sealed system with 3bar PRV and pumped. The cylinder is on 2...
    • maltman
    • Thread
    • bar baxi baxi system boiler city cold cylinder ecomax expansion gas header hot motorised valves pipe plumbing pressure pump sealed supply system valve valves
    • Replies: 5
    • Forum: Plumbing Jobs | The Job-board
  20. C

    Baxi System 100 HE Plus

    We installed a Baxi System 100 HE Plus condensing boiler into a new closed system nearly 5 years ago. It gets serviced annually yet breaks down at least once or twice per annum, ie pressing the reset button won't restart it. Wondered if anyone also has experienced problems with this boiler...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock