- Messages
- 941
Hi lads, I know this is a long shot but do you know where ye might pick up some Pegler rad valve on/off caps. Have tried suppliers here in Dublin but with no luck.
- Thread starter bright spark
- Start date
- Replies 3
- Views 803
- commercial heads model old pegler rad valve suppliers valve
Discuss Old type commercial Pegler rad valve heads in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
R
Ray Stafford
Which Pegler valve? Belmont?
- Messages
- 941
Don't know exact model valve. They're 3/4 and 1' ones. My brother who's a plumber was just saying it to me in d office this morning.
The ones with the brass H shaped piece underneath. I used to pick em up off off an old guy who ran a small merchants in Dublin but he's gone to d big suppliers in d sky if ye get me.
If I get the model I would appreciate any help.
Thanks Ray.
The ones with the brass H shaped piece underneath. I used to pick em up off off an old guy who ran a small merchants in Dublin but he's gone to d big suppliers in d sky if ye get me.
If I get the model I would appreciate any help.
Thanks Ray.
- Status
Reply to Old type commercial Pegler rad valve heads in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi,
I need to remove some radiators for redecorating and went to try and shut off the valves either side of my rad. I have TRV on one side and on...
Hi,
I was hoping someone might be able to help with this. The tap is a Bristan RS BAS C, the hot tap has been leaking and I've trying to get the...
Hi,
I have 3 port value for HW & CH.
Loft extension added many years ago so they added a T to go upstairs,
only 2 rads up but 11 downstairs...
Hi,
My Blanco Kitchen Tap Model Swift BM1420 is leaking.
Please see attached photos for details of where water leaks from.
What I've done so...
Hi - recognise this a bit of an odd one. We have an old failed mixer valve which we need to replace. This valve actually predates a temperature...