Discuss Fernox TF1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Yep on 837 . From right looking at front of boiler
Flow. DHW gas cadd return
 
Last edited by a moderator:
You must be fitting them backwards :smile:
The pipes on all newer model vaillants are, from the left, flow, hot, gas, cold, return, condensate, prv
 
You must be fitting them backwards :smile:
The pipes on all newer model vaillants are, from the left, flow, hot, gas, cold, return, condensate, prv

My left not urs! Watching breaking bad at same time!
 
Status
Not open for further replies.

Reply to Fernox TF1 in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I'm in a bit of a bind with a current CH install where I need to install a filter prior to a flush but no where to install My issue is the...
Replies
7
Views
603
Hi, first time plumber and poster here. I've installed two new zone valves and replicated the direction inwhich the original valves were...
Replies
1
Views
622
Deleted member 120897
D
Hi all! I'm in the process of fitting a replacement undersink water heater in my shed and, as advised in the instructions (yes, I know, what am I...
Replies
2
Views
381
… praying to the plumbing God, Bob Pictures and layout details attached, so be patient. 21 year old oil fired system in pretty good nick. I...
Replies
7
Views
1K
Hi All This is following on from thread I made a few days ago but can't seem to find I'm in a bit of a bind with my CH design where I want to...
Replies
0
Views
438
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock