Search the forum,

pumping over

Pumping stations, also called a pumphouse in situations such as drilled wells and drinking water, are facilities including pumps and equipment for pumping fluids from one place to another. They are used for a variety of infrastructure systems, such as the supply of water to canals, the drainage of low-lying land, and the removal of sewage to processing sites. A pumping station is, by definition, an integral part of a pumped-storage hydroelectricity installation.

View More On Wikipedia.org
  1. C

    Pumping over on vented system, despite cleaning, new pipework and ..

    … praying to the plumbing God, Bob Pictures and layout details attached, so be patient. 21 year old oil fired system in pretty good nick. I noticed some minor pumping over from the vent (occasional burst of water, and the odd dribble). Didn’t think much of it as I was about to replace the...
  2. plumb_know

    preventing air ingress & pumping over when moving pump by boiler

    have moved a pump by new boiler so could wire for pump overrun as no live in airing cupboard, but now I am worried about air ingress into the system as system is under negative pressure. Anyone got any tricks to help prevent this?? or know how to get pump over to airing cupboard without...
  3. B

    Thermal store pumping over from wood burner-recommendations requested

    I'm looking for help with an open vented central heating system that is pumping over. We have a thermal store that has two heat sources - gas central heating, and a wood burner - both feeds are pumped with a Wilo Smart A 25/4-130 circulation (one pump per feed). When the wood burner kicks in...
  4. J

    System pumping over into F&E

    I'm trying to make sense of a system I've came across. One part that's caught my attention is the position of the pump. The system is pumping over when the stove is lit. As you can see the pump is directed toward a tee heading towards a 28mm elbow which I believe is the stoves return. The...
  5. J

    Stove F&E pumping over

    Hi, I have a stove pumping over into the f&e. The pump and thermostat both work and the system is free from sludge (very clear for an open vented system). The layout seems a bit funny to me but the customer reckons its worked for years. (I did spot two vents into the F&E so maybe someone was...
  6. J

    Problems with air entering central heating system

    Air entering central heating system and hot water pumping over into make up tank in artic when h/c control is switched on. There is no problem when only c/h is on! this situation as only occurred since replacing my Grundfos UPS2 with a UPS3 I have tried the pump on different speeds . On the box...
  7. N

    Pumping Over

    A bit of a story but please bear with me. I have just sent 10 days away having switched off the the central heating controller and boiler. This is someting I do not normally do. I usually just turn down the C.H. thermostat but leave the hot water timed. The system is open vented, Y plan When I...
  8. R

    Pumping over - on hot water only

    Got an open vented system with two 2 port valves and a fairly recent ‘electronic’ pump, set to fixed speed 2. In the recent colder weather, I turned the boiler up a bit and then became aware the boiler was singing so turned the pump to 3. By chance noticed an icicle hanging from the expansion...
  9. B

    Gravity system pumping over?

    Happy New Year all. Just been out to a noisy gravity system where pipes are making a racket. Checked vent in f and and e tank and it's warm full of brown sludgy water. Am I right in saying that the see sawing of dirty water will make the system dirtier and pull in air over time. pump speed was...
  10. king of pipes

    Grant boiler pumping over

    Got a grant oil fired boiler on a large system two heating zones and a hotwater zone each has a honeywell zone valve, the heating is pumping over intermittently a surge of water its as if the boiler is keeping firing when it should be off need to go into it in more depth any ideas guys . cheers kop
  11. B

    Pumping over into F&E

    Hi, Am new to this forum so please go easy on me!! :) Am a keen DIYer, completed level 2 plumbing at college some time ago but do not work in the trade. In the summer i checked out the F&E tank in the loft and noticed it was full of sludge so decided to vac it all out and give it a good clean...
  12. C

    pumping over problem

    Just after a bit of advice. have a main 15he conventional boiler that at the point the pump switches off you get a trickle of water for about 2 seconds in the header tank. F an E are in correct place with air jec but its about waist height in the airing cupboard. was going to combine the F and...
  13. D

    Expansion pumping over

    Hi I have an S plan heating system with a deaerator fitted and a Grunfos 15-60 in a 19 rad system When I run the pump on full it pumps over the expansion The cold feed isn't blocked It doesn't pump over on hot water only This is a new occurence as it never happened before I am a retired...
  14. D

    Expansion pumping over

    Hi I have an S plan heating system with a deaerator fitted and a Grunfos 15-60 in a 19 rad system When I run the pump on full it pumps over the expansion The cold feed isn't blocked It doesn't pump over on hot water only This is a new occurence as it never happened before I am a...
  15. F

    Pumping over or venting

    Problem with pumping over on a domestic vented central heating system.... I am a fairly capable diy'er and have started to tackle the CH in our home, the system had started pumping over into the F&E tank. I had initially put it down to a failing pump (getting noisy) pump changed bit of gunk...
  16. E

    pumped system pumping over

    Hi all, I went to look at a job today in which the header tank is full of hot water and overflowing. There is back boiler and the pipework runs upstairs to the cylinder but i can see no valves. I did not want to take out the fire and told the customer that I would prefer to do some research...
  17. U

    Help with pumping over on incorrect system layout (I believe!)

    Hi Would really appreciate if someone can help, done the 100 hrs on the web trying to fix myself but need guidance. I have a two story house with boiler in external garage. I have recently added eTRVs on all but 1 rad, cleaned system etc. Issue is when I have only say three/four rads open...
  18. P

    Pumping over

    The issue I have is water pumping up the vent pipe into the f/e tank. For some reason the water level of the tank is not rising. The pumping over happens whether the system is hot or cold. Also the downstairs radiators are struggling to get warm. I have checked the pump, I've cleaned and...
  19. L

    Pumping over?

    Keep seein this term? What does it mean?:tounge_smile:
  20. C

    is it ok to raise F and E tank vent arm to prevent pumping over ?

    hi, i've had some modifications to my central heating system in past 6 months and am experiencing some set up problems : new boiler, new different spec. pump , trv's . i have been commissioning it myself basically because the installers aren't interested, i have noticed air collects...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock