Search the forum,

Discuss Dual timer switch with 30 minute boost in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

ronan2575

I am searching for a Timeswitch which controls both heat and water. It is linked up to our gas boiler. We presently have a Towerchron QE2 Timeswitch

Why I am looking for a new one is I only want a 30 minute boost, the Towerchron QE2 Timeswitch is a 1 hour boost, and there is no way to reduce the time from 1 hour to 30 minutes. I have emailed the company to confirm this, I have also looked on the internet for a switch with a 30 minute boost.

Does anyone here know of a digital dual timeswitch with a 30 minute boost that I could purchase?

Many thanks
 
I've never seen one around there mostly 1 hour boost. Might be worth emailing manufacturers like honeywell. Drayton. Danfoss. Siemens etc see what they say.
 
Hi there ronan. Welcome to the forum. I can't say I've ever came accross 30 minute boost or advance buttons . That's not to say there isn't one but certainly 1 hr is the usual style. ...
 
Why 30 mins?

If the water is already quite hot the cylinder thermostat will cut the boiler off when the water is up to temp regardless of the 1hr boost.

If the water is cold, 30 mins isn't enough to heat it up fully.
The above is probably the reason no-one has a 30 min boost setting.
 
^^^^ spot on .
I think horstmann used to make a 30 min, 60 min, 120 min.
 
Status
Not open for further replies.

Reply to Dual timer switch with 30 minute boost in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Hi everyone, I have a Santon Premier Plus PP120E (unvented direct immersion heater) fitted with two thermostats, which provides hot water to taps and shower. The central heating runs from a separate system. On the PP120E: Bottom thermostat is set it to 4 out of 5 (approx. 60C), and connected...
Replies
0
Views
401
Bridog
B
Hi all, I have an OSO Direct 210 hit water cylinder installed in my home, with 2 switches (on/off; and boost). The boiler is for hot water only (rads are electric). In the 5 years that I’ve lived at this property, I’ve never once turned the boiler off; however, with soaring energy prices, I’m...
Replies
6
Views
461
Hi, I am trying to link a Hive heating & hot water dual channel receiver to an old Vaillant THERMOcompact VU GB 242/1 E system boiler. It has an internal programmer that is similar to a time switch 120 (plug in seven day programmer) This programmer is connect to a terminal strip using 345 (three...
Replies
0
Views
422
Replace the current E7 Newlec Economy control to a mechanical 24 hour timer switch for unvented cylinder water heater, may I know if I ask plumber or electrician to do this job. Because Newlec Economy controller can heat up water once a day in midnight .I would require constant hot water in...
Replies
3
Views
1K
It was fitted with the boiler a Potterton Suprima 30L about 21 years ago. Two PCB's later and a new fan the boiler is working perfectly. However, the programmer display is not showing any digits for the clock or anything else so I am unable to program it. It still works the boiler manually...
Replies
14
Views
1K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock