Drayton Digistat+ 3 hard wire problem

[Inverness]

My boss is gas safe. It's a glow worm combi 10year old not a condensing.

 

[ShaunCorbs]

do you have a heating timer on the boiler or is it sep? if you do you only need a simple room stat

Drayton Digistat + Room Thermostat | Thermostats | NoLinkingToThis

[url]http://www.NoLinkingToThis/p/honeywell-dt90e-digital-room-thermostat-eco/41365
[/URL]

 

[Inverness]

Nothing on the boiler. I used the Honeywell programmer with a built in thermostat.

 

[ShaunCorbs]

Honeywell CMT921 Wireless Room Thermostat | Wireless Thermostats | NoLinkingToThis

 

[Inverness]

Got it working. The face on the programmer wasn't connecting the pcb board. As I had it screw too tight against the wall. It's clicking off and off now. Great.

 

[ShaunCorbs]

Got it working. The face on the programmer wasn't connecting the pcb board. As I had it screw too tight against the wall. It's clicking off and off now. Great.

bloody plastic cr*p

good job for sticking with it

 

[Inverness]

Yeah I know. When I remove the back case and put the front back on I heard the signal wire making a click sound to the boiler then it fired up. Thanks to your patience and expert advise now I have a new programmer working.
Thanks again.

 

[ShaunCorbs]

Yeah I know. When I remove the back case and put the front back on I heard the signal wire making a click sound to the boiler then it fired up. Thanks to your patience and expert advise now I have a new programmer working.
Thanks again.

not a problem