T
tamz
You're welcome.
Discuss Drayton Digistat+ 3 hard wire problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hi Tamz, You can't get rid of me that easy. The help and advice you gave me was great, the installation of the hard Wired Digistat +3 went well. Now I have another issue you may feel that you can help me with. Having seen My new Digistat +3, My daughter has just purchased the Digistat+ 3 RF701 version, and guess what, who do you think will be connecting it up. Loking at the Wiring Diagram it looks like all I have to do its disconnect the wiring for the old Stat from the Combi Boiler, Link into theOnce again Many Thanks. I will follow on with a further reply probably tommorrow letting you know how I have got on.
Best Regards
Dave Box
Hi Tamz, Success, after following your instructions a trouble free installation which only took a couple of minutes to do, it's a massive improvement on the Micromark, which was running OK but did not give me the progammable options that the Digistat + 3 does, it's very user friendly and easy to use. Once again Many Thanks for your Help and advice with this issue.
Best Regards
Dave Box
Hi Tamz, Back again just to clarify it, with the cable you have said I need, I know I have some 3 core cable that I can use to run Two bits of cable One for L & N terminals and the other for terminals 1 & 3.Once again Many Thanks Tamz, Once done I will let you know.
Best Regards
Dave Box
The only doubt I have is with the earth wire, on both leads, I presume that I should ignore this as it states that it is not required as the receiver is double insulated.
Regards
Dave Box
Reply to Drayton Digistat+ 3 hard wire problem in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.