A
- Thread starter king of pipes
- Start date
- Replies 2K
- Views 28K
- working
Discuss What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Messages
- 21,051
Never been tested till you try to get the baffles out of a new style worcester camray that's not been touched for a few years. Need to be a magician
- Messages
- 6,157
Always a challenge mate when they get that bad . Kop
[automerge]1603483372[/automerge]
Had me own problems today Shaun i fitted the combination units damage on the back panel on the toilet , then went to fit the ceramic top to find it like a banana cracked and chipped grrrr been a bit of a challenge this one client came home today so smooth ed it over with them should have a new top by Tuesday
kop[automerge]1603556311[/automerge]
Nearly there with this one replacement basin top coming Tuesday
start another one Monday 
Have a restful weekend chaps . Kop
Attachments
Last edited:
- Messages
- 6,157
Few hours today making good and decorating put the blind upAlways a challenge mate when they get that bad . Kop
[automerge]1603483372[/automerge]
Had me own problems today Shaun i fitted the combination units damage on the back panel on the toilet , then went to fit the ceramic top to find it like a banana cracked and chipped grrrr been a bit of a challenge this one client came home today so smooth ed it over with them should have a new top by Tuesday
[automerge]1603556311[/automerge]
Nearly there with this one replacement basin top coming Tuesday
Have a restful weekend chaps . Kop
Attachments
- Messages
- 10,442
I like that all in one sink worktop mate. Where is it from? I’m replacing a shower cubicle This week, but they are Keeping the same toilet and basin but new tiles behind.
- Messages
- 34,363
- Solutions
- 2
Always a challenge mate when they get that bad . Kop
[automerge]1603483372[/automerge]
Had me own problems today Shaun i fitted the combination units damage on the back panel on the toilet , then went to fit the ceramic top to find it like a banana cracked and chipped grrrr been a bit of a challenge this one client came home today so smooth ed it over with them should have a new top by Tuesday
[automerge]1603556311[/automerge]
Nearly there with this one replacement basin top coming Tuesday
Have a restful weekend chaps . Kop
good luck with the new ones
- Messages
- 6,157
Sweet H sink work top is From elation bathrooms via plumb city mate, i have another one of these next week but strangely enough it's a shower out and shower bath going in should be interesting.
. Kop
- Messages
- 21,051
Start wetroom on Monday. On the way home monday night fix a leaky pump and look at a bath out walk in shower in. Tuesday night pump up ev on an unvented followed by changing a basin mixer and looking a bathroom refit. Wednesday night fix a leaking toilet on way home.
Oh plus tomorrow moving 3 rads on a biomass system.
Roll on christmas.
Photos to follow
Oh plus tomorrow moving 3 rads on a biomass system.
Roll on christmas.
Photos to follow
- Messages
- 6,157
- Messages
- 21,051
@SimonG is that Carbon steel press?
when they want it first fixed but haven’t ordered the gear yet
View attachment 45922
Yes, theres an external biomass boiler and then the tank in the cellar. They're having the kitchen done so wanted two new rads, luckily right above the plant room.
- Messages
- 10,442
I am currently here. Hard work on the 3rd floor
Attachments
- Messages
- 6,157
Bath is in connected up boxings done combination units to do next. Kop
[automerge]1604002876[/automerge]
Bit more done today bit of a cosy fit nice units though (eco bathrooms ) all be they are sprayed MDF
[automerge]1604002876[/automerge]
Bit more done today bit of a cosy fit nice units though (eco bathrooms ) all be they are sprayed MDF
Attachments
Last edited:
- Messages
- 6,157
Put this one to bed today replaced the rad for a towel rail to give a bit more room at the loo fished all the fiddly bits off 
turned out pretty good considering what I had to work with. Cheers chaps kop
turned out pretty good considering what I had to work with. Cheers chaps kopAttachments
- Messages
- 34,363
- Solutions
- 2
Looking good kop turned out nice
- Messages
- 6,157
Spot my modification
Shaun ??Attachments
A
Aquarius
Only thing I noticed @king of pipes was the pipework at the bottom?
- Messages
- 34,363
- Solutions
- 2
Spot my modification
cut the brackets down in height
- Messages
- 6,157
I cut 40 mm off the wall fixings bud so went straight on the existing pipework and makes it closer to the wallOnly thing I noticed @king of pipes was the pipework at the bottom?
kop
- Messages
- 34,363
- Solutions
- 2
I cut 40 mm off the wall fixings bud so went straight on the existing pipework and makes it closer to the wall
done the same a few times on a Friday when the door just catches
- Messages
- 34,363
- Solutions
- 2
A
Aquarius
Looks new that Shaun.
[automerge]1604329521[/automerge]
Oops, that’s what you’ve fitted
- Messages
- 34,363
- Solutions
- 2
My home on and off for the next two to three weeks full new system but surface pipe work
plenty of black gold as it’s an old gravity system luckily it’s getting painted after
[automerge]1604428057[/automerge]
Sheet or individual hope there in sheet not too bad then but still a faff
plenty of black gold as it’s an old gravity system luckily it’s getting painted after
[automerge]1604428057[/automerge]
Sheet or individual hope there in sheet not too bad then but still a faff
Attachments
Last edited:
- Messages
- 6,157
Ball ache you got there Simon
kop[automerge]1604430067[/automerge]
Done and dusted this one not sorry either customer was ringing me every day
till I got it finished . KopAttachments
Last edited:
- Messages
- 6,157
Grouting up will be a pain Simon what colour they going for ?? . Kop
- Messages
- 21,051
White. Luckily. The pain is cleaning up the adhesive.
- Messages
- 34,363
- Solutions
- 2
- Messages
- 34,363
- Solutions
- 2
- Messages
- 10,442
Me too but forget to get pictures. Old Worcester 24 system off and new Baxi 824 system on. Back there tomorrow and Wednesday.
- Messages
- 6,157
- Messages
- 6,157
What's not to like mate ?? need to keep these level and work clean
kop
- Messages
- 21,051
What's not to like mate ?? need to keep these level and work clean
Sorry bud, fat finger syndrome
Like a nice bit of slate, just messy to work with.
How do you find the levelling system?
- Messages
- 6,157
this one's not great if I'm honest (Topps tiles) they often break putting the wedges in but they will do supposed to regularised slate but a few high spots but will be fine once completed.kop
- Messages
- 34,363
- Solutions
- 2
Any reason you removed the rad kop new one ?
- Messages
- 21,051
Looks like to get the skirting board off.
- Messages
- 6,157
Yes mate skirtings off and walls have had a fresh coat of paint
- Messages
- 10,442
Missing pics from yesterday lads/lasses
Attachments
- Messages
- 34,363
- Solutions
- 2
- Messages
- 10,442
Just got the powerflush left to do tomorrow. That looks like a beast mate. What size is that.
- Messages
- 34,363
- Solutions
- 2
25kw first time doing a rear flue wasn’t as bad as I thought
A
Aquarius
You small enough to fit in the cupboard to service it Shaun, or do you employ hobbits?
- Messages
- 34,363
- Solutions
- 2
You small enough to fit in the cupboard to service it Shaun, or do you employ hobbits?
I would not fit but luckily the top comes off so it’s all goodReply to What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hi all,
We recently purchased a house and nothing seems to work correctly here, I've spent weeks rectifying issues. Plumbing, electrical...
Hello All and thanks Lou i did write a reply but it would not let me send it? i am not sure what I am meant to write and I do not want to come...
I was on this forum a long time ago and I would like to explain my experience of plumbing. This may be a long post but I will be happy if it helps...
Hi,
I need advice from experienced plumbers please, I got my bathroom done a few weeks ago, the job was done but the detail was very poor. I had...
Newest Plumbing Threads
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 0
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 1
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0