Discuss Tool to siphon the last bit of water out of cistern in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
N

NGduffin

Hi, as the title says I'm looking for a tool, something like a hand pump, just to get the last bit of water out a cistern. I remember a plumber I worked with once had
a high pressure plunger like a big syringe so when submerged and the handle pulled it sucked water and held it. I wondered if any of the big diy stores sold them as I could do with one tomorrow.

Thanks all
 
I've used these, can be used for other cleaning too!

Microfibre Cloth Pack of 50 | NoLinkingToThis

May be available elsewhere cheaper.
 
31YSdalsObL._SL500_AA300_.jpg


I have one of these, under a fiver from motor accessary shop.
 
This is what the O.p is thinking of;

Sink & Bath Unblocker | NoLinkingToThis
 
Bucket and a bit of hose if I can't be bothered getting the wet vac out.

OR

lots of towels and pull out the inlet valve, I don't do this, unless the floor is tiled:devil:
 
Last edited by a moderator:
Manometer tube into pan and a good old suck, or a decent tilers sponge. Had one of those hand pump siphons, lasted 2 mins.
 
You could get one of those tools they use for testing car battery's the one they stick in the holes and squeeze the rubber bulb on top and sucks the liquid out no idea what it's called
 
Which cistern are we talking about here?
 
two bloody pages on how to get the last drops out of a cistern ffs as anyone heard the word 'ingenuity' ? or the term ' use ya noggin '
 
manometer tube you could fill a van with gadgets best to use whats available one end in cisten quick suck and drop into pan
 
Sponge is the easiest way. Flush the loo, and get ris of what you can, and use a sponge for the rest. Or the wet vac if you really can't spill a drop.

I tried the manometer tube method, and it takes ages.
 
Only time I syphon is on high level toilets, a sponge is a lot quicker
 
dont forget gloves for the blue loos!!!!!!!!!!!!!!!!!!!!!!!!!!!!
 
Just loosen the float operated valve and hold a bucket under it.
 
flush toilet, disconnect all connections, lift toilet out and pour down toilet (if in rush and cant be bothered with wet vac)

dont take connection off as doesnt go in bucket, it leaks everywhere
dont use sponge or any other contraption as takes too long and never find it in van and it will break when rattling round the van!
 
flush toilet, disconnect all connections, lift toilet out and pour down toilet (if in rush and cant be bothered with wet vac)

dont take connection off as doesnt go in bucket, it leaks everywhere
dont use sponge or any other contraption as takes too long and never find it in van and it will break when rattling round the van!

I wouldn't be taking the cistern out to change the inlet valve, if it's the syphon then pouring it out is the way to go.
 
oh yeah, well if your good you cant get float valve out and new one in without removing all the water! as long as they havent siliconed it!
if its side float valve then u dont need to empty it!!
 
Very simple and very cheap, I carry a large turkey baster in my tool kit, it works a treat even fits into pipes
 
Last edited by a moderator:
Got a battery siphon thing, the corgi magazine does them. Works o.k , you still need a sponge to get the last dregs. Its good for draining the u bend before you take a pan out.
 
Hang on to that one then. Last one I had could barely count to 10 and kept giving me surly looks all day!

His arse kept meeting my boot!

My apprentice is the Missus, makes things difficult,but not impossible if you run quick :(
 
Status
Not open for further replies.

Reply to Tool to siphon the last bit of water out of cistern in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

So I bought my first flat recently (am in UK) and in a bit of a pickle as the bathroom has turned up lots of problems that weren't picked up by...
Replies
1
Views
730
I have a concealed cistern in a 20 year-old house. It is the old syphon type, and over the last couple of months it has started to have an...
Replies
3
Views
3K
Sorry I have sort of asked this before, tried professionals but not great 1st experience hence DIY attempt attempt again. 2 completely cold...
Replies
3
Views
671
I have a high level cistern and was replacing the toilet pan (waste ceramic completely cracked through) and was hoovering around before connecting...
Replies
9
Views
3K
Cast_Iron_Cisterns 486
C
I am having a real problem with a leak that commenced a couple of months back re my folk’s WC. It is a straightforward Armitage Shanks low-level...
Replies
9
Views
3K
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock