Discuss Reason I hate plastic valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Best

Esteemed
Plumber
Subscribed
Messages
10,034
Went to bung water off on a cwt in attic of a modern posh house and discovered water everywhere around tank and ceiling. Fluidmaster plastic tailed side entry valve, (which I then replaced with brass tailed Pro version) was leaking at end of tail. Close inspection shows the plastic has cracked in 2 places
image.jpg
 
I thought following on from that thread before you had decided to use part 2's now best?
 
I have just had another look and magnified it to discover the plastic is full of fine cracks!
Use this photo as reason to replace any you come across.
image.jpg
 
I thought following on from that thread before you had decided to use part 2's now best?

Customer wanted to keep same type of valve as I had told him it was probably originally fitted in recent years to be a silent fill. I like them, but wary when they eventually do go faulty and fill in very fast. I only ever use brass tailed valves, mainly part 2, although they aren't great either
 
Customer wanted to keep same type of valve as I had told him it was probably originally fitted in recent years to be a silent fill. I like them, but wary when they eventually do go faulty and fill in very fast. I only ever use brass tailed valves, mainly part 2, although they aren't great either

How often I have changed those ... They not only cracking as well the threads get ruined very fast
 
How often I have changed those ... They not only cracking as well the threads get ruined very fast

Seems to be different grades of plastic in valves. That valve was in an unlit attic, yet it is full of fine cracks on and near where the olive was hitting. Just not up to the purpose it is supposed to made for. I will bin everyone I come across if customers allow me
 
Brass all the way, can't damage / cross thread brass too easy
 
I'm a brass only guy too, unless ive been given the fitting by a friend for free and on a emergence/weekend job, but usually brass and i let the customer know keeps them happy
 
Brass fluid master and turbo 88 and you will rule the world
 
Status
Not open for further replies.

Reply to Reason I hate plastic valves in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I am doing a DIY job - fitting a new inlet valve - "Viva Skylo Bottom Entry Fill Valve Plastic Shank" 1/2 inch. The existing pipe to the...
Replies
6
Views
4K
Having just moved into a property and discovering the central heating not functioning, after 3 months we eventually was able to get the property...
Replies
14
Views
2K
Hi just joined the forum. Looking forward to getting some experienced opinions here. Really quite desperate to get 2nd opinions etc.... We have a...
Replies
9
Views
2K
Hi.. My central heating had stopped working although till had hot water... after a search and finding the manual lever on the Drayton MID valve...
Replies
4
Views
2K
  • Locked
Vaillant EcoTec 931 R1 47-044-32 I have worked in this industry for over 40 years and never experienced this. One of the issues being that the...
Replies
5
Views
2K

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock