Discuss Question about Cold Water Booster Set in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I agree ...loads of questions before any advice ..no shooting from the hip in my operation....except on saturdaysIf you have a good pressure but poor flow, supply partially blocked, leaking or undersized. What size is the Property??? Is it on Gravity System? Tanks in loft & Cylinder???
ok , before I would specify anything on this job I would want to know
1. heating system full details
2. present water pressure & volume per. min...and customer expectation
3. building lifestyle ..how many people..is it domestic or commercial
4. future plans extensions etc
5. customers intended budget to makecsure we are all singing off thevsame hymm sheet.
then I would produce a specification get it approved, put a fixed price quotation in at proper commercial rates draw a contract up, take a deposit and deliver it in specified timescale
subject to variations
however if the op puts up the info properly we can all have a proper look in my opinion
Rob Foster. aka centralheatking
that's lovely quiet
If you have a good pressure but poor flow, supply partially blocked, leaking or undersized. What size is the Property??? Is it on Gravity System? Tanks in loft & Cylinder???
Shoun in your opinion what size of pipe should go to 2 floor to get that time of filling bath??Aslong as your pipe sizing is correct yes/ you could
Hi Rob,
1. I don't know probably full details of heating system but i can tell you there is 12 radiators (4towell rails) , boiler Vaillant 30kw, 4 zones (1 underfloor heating) but i don't know why you ask about the heating if i need suite only pressure and flow rate???
2. 1.5 bar, volume i don't know? But i read 18l/min is descent
3. 2+2 family + 2 parents/visitors. It is my house.
4. no more kids no extensions. Just sort this house nicely
5. budget i don't know i would like to buy something right quality to money and install my self. I know how to hold spanners and pliers.
Sorry if you gays feel used, but i really try save some money, anyway i will install something i just don't want learn on my mistake because it will cost me a lot 3-4k if i don't get right result. I am DIY person, know how to solder on my own purposes, some knowledge i have i like to know what's going on in my house, ect. If you don't want to help its OK i will be just little bit sad because i was thinking this is forum for everyone not only proI luv these sort of threads over a weekend
Can you guys design something for me from little or no intel, I don`t know the budget but I want to install it myself cos I know how to hold spanners and pliars.
Reply to Question about Cold Water Booster Set in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.