power shower

[marchowe]

hi i have been asked to fit a power shower for a customer and the system he has is a direct system with a hot water cylinder in the ac with a cwsc directly above it. is it possible to install a power shower with this system will there be enough head pressure to take the 15mm copper up through the loft and back down to the bathroom. ant advice please thanks

 

[Plumbstar Tom]

i dont know the head so cant say

Check manufacturers instructions first

~do you mean an integeral power shower?

 

[testarossa]

i dont know the head so cant say

Check manufacturers instructions first

~do you mean an integeral power shower?

Yes for sure, all the instructions and directions are there fully applied..

 

[Plumbstar Tom]

and does your head meet the MAnufacturers minimum?

and is it an intergeral power shower?

 

[WHPES]

Depends on the distance from the water level in the cistern to the shower head. A pump will work it if it is not enough. You may need to fit an automatic air vent at the top of the loop to prevent airlocks.