R
rob2048
Sorry I didn't know it had no hammer or any thing we use a makita which has other functions on it so its core only
Discuss Marcrist ddm2 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Will get my angle grinder out
Safer if you don't go over 2" with the grinder as there is no clutch but you can do it if you can hold it.
Core Buddy Hole Coring with an Angle Grinder - PWM Sales .Ltd - YouTube
and from about 1:30 here
Dry Hand-Held Core Bit - YouTube
Just been looking at these on the web you can get dm2. And the better core bits together I've noticed two kinds of the same core bits different boxes most with the ally box and some with a plastic box I can see in the plastic box it has a extension bar but carnt see one in the ally box one does any one know if there is a differance thanks
I believe the ddm3 is still available, same drill with a 3 speed 'box I'll probably get one these if my 2 ever packs up.
i'm interested to see which is the better beast between the ddm3 and milwaukee.
when the ddm3 binds and jerks does it do it badly ?It is a no contest if you put the ddm3 on speed 3
Marcrist 127 CCU850X Diamond Core Drill Set 249.512.0002 - £126.99 - www.protilertools.co.ukKing where did u get your cores from
when the ddm3 binds and jerks does it do it badly ?
more speed means quicker holes
Reply to Marcrist ddm2 in the Plumbing Jobs | The Job-board area at PlumbersForums.net