I’m doing some 4” soil and I’m having a debate about what can be done with these fittings. They’re both 45s. The double socket has a ring seal on it facing up and the spigot of the other 45 goes into it the bottom. The 2nd 45 is then glued on the spigot and socket. Is this acceptable?
Discuss 4” osma fittings advice please? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
- Messages
- 34,372
- Solutions
- 2
Yes fine just be certain when glueing I’m guessing your making a set /
Reply to 4” osma fittings advice please? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Similar plumbing topics
Good morning! First post looking for advice on an issue I am having with a bath installation. Although I have installed many baths before, mainly...
Hi all, please could anyone help me with the following issue im having. I will start off with listing the scenario in case it helps.
Boiler -...
Hi all, looking for some soil pipe/stack help please.
I bought my first house end December and unfortunately had a toilet pipe blockage within a...
Hi
I fitted a bath/shower 12 years ago and a few months ago it developed a leak.
It was basically at a coupler on 40mm solvent where my new...
I wonder if anyone can help, I've tried several plumbers merchants to no avail. I have removed an old stopcock, (which seized long ago, with a...
