- Messages
- 3,407
I see the stuff you mean now Colin, only done it myself a couple of times but the sheets were to big to go through a chop saw
Discuss what else do I need in the Plumbing Jobs | The Job-board area at PlumbersForums.net
You are thinking of the large shower panel boards. The panels I use are 250mm wide x 2.6m long x 10mm thick and are made of Upvc. I use a mitre saw to cut them at width and a table saw to cut them at length.I see the stuff you mean now Colin, only done it myself a couple of times but the sheets were to big to go through a chop saw
I'm now fitting them as a better alternative to tiles and to the extent that all bathrooms booked in are having these panels installed.
Not cheap though, I charge from ÂŁ65 per m2 including materials amd labour but if you compare with tiles, adhesive, labour and grout etc, the price is almost on a par. The big advantage is no maintenance is required and they retain their appearance from new.
They are fully waterproof so yes. A range is also available for floors.also, are the panels suitable for floors, wetrooms etc??
Reply to what else do I need in the Plumbing Jobs | The Job-board area at PlumbersForums.net