Search the forum,

Discuss Toilet Flush Valve Identification Help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Pottydrill

Can anyone identify this toilet flush valve, I cant replace it with a generic because the flush button pushes directly on the top of the valve.
Thanks in advance
~
 

Attachments

  • IMG_2325.JPG
    IMG_2325.JPG
    26.2 KB · Views: 59
Why not just replace whole lot with a new different flushing valve & its push button that comes with it?
 
As Stani says it is a polypipe pacific. You won't get one of them for love nor money. New valve time soz
 
look at the add again,it says cistern has to come off

Sorry, confused me and I see it's the last picture that they say cistern doesn't need removed, and not the second. Please remove that post, as I can't.
 
Last edited:
Status
Not open for further replies.

Reply to Toilet Flush Valve Identification Help in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
534
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
206
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
198
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
148
Hi Does anyone recognise the make/brand of the radiator valve. It leaks when closed and Iam hoping I can replace a seal etc?
Replies
4
Views
182
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock