You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
flush valve
A flush toilet (also known as a flushing toilet, water closet (WC) – see also toilet names) is a toilet that disposes of human waste (principally urine and feces) by using the force of water to flush it through a drainpipe to another location for treatment, either nearby or at a communal facility, thus maintaining a separation between humans and their waste. Flush toilets can be designed for sitting (in which case they are also called "Western" toilets) or for squatting, in the case of squat toilets. Most modern sewage treatment systems are also designed to process specially designed toilet paper. The opposite of a flush toilet is a dry toilet, which uses no water for flushing.
Flush toilets are a type of plumbing fixture and usually incorporate an "S", "U", "J", or "P" shaped bend called a trap that causes water to collect in the toilet bowl to hold the waste and act as a seal against noxious sewer gases. Most flush toilets are connected to a sewerage system that conveys waste to a sewage treatment plant; where this is not available, a septic tank or composting system may be used. When a toilet is flushed, the wastewater flows into a septic tank, or is conveyed to a treatment plant.Associated devices are urinals, which dispose of male urine, and bidets, which use water to cleanse the anus, perineum, and genitals after using the toilet.
Hello,
I have to replace the flush valve and/or the washer but unfortunately it's inside the vanity unit.
The only way is removing the toilet.
I turned the screw on the cistern pipe to stop the water.
I removed all the silicon around the toilet, now I can easily lift up the Front panel but...
Hi all, I am trying to find an alternative flush valve to fit the cradle of a ideal standard push btn flush.
It is all tiled in and changing to a Siamp or fluidmaster is not an option anyone have any ideas
Thanks
Hello, I want to change the system fill valve, but I’m struggling to dismantle the existing toilet to access underneath the tank, I’ve added some pictures can anyone advise of the steps?
Thanks!
I have a wall hung pan with a concealed cistern. The flush is the "old style" Grohe Eau2 dual flush pneumatic button. When pressed the flush valve lifts lightly and closes giving a very short weak flush. You can manually lift the flush valve in the cistern and it moves freely, flushes fine and...
i have 3 sottini toilets with a compact cistern.
It has an ideal standard dual flush mechanism. 2" entry
The ideal standard is poor quality in my opinion, I have replaced the washer and complete unit several times but it always leaks within a short time (between 0-18 months),
I would like to...
I have a Viva Skylo flush valve and want to adjust it for maximum flushing power on the full flush. None of the instructions indicate whether a higher or lower number will achieve this, and I can't see an obvious difference in the water volume. Anyone know how the adjustment works...
Hello,
Recently I received an unusually large water bill which led me to the discovery of leaking flush valves. I have two toilets and it turned out in both the valve seals were bubbling so I set out to replace them. For now I just flipped them over as the other side was smooth on both.
The...
I recently moved into a new flat and both toilets were dripping when not in use. I found that the issue was the flush valve seal and replaced it on both of them. It stopped the dripping but the issue now is that sometimes it sticks after flushing and I need to give it a wiggle to make it go back...
Hi everyone,
The flush button on my toilet has stopped working. I have been quoted £95 to supply and fit a new flush valve and £75 to supply and fit a new ball valve. Please could someone kindly advise if this is a reasonable price?
Thank you.
Hi there, our flush valve is still raising but refusing to drop back down. Been to all the plumbers merchants but none have anything that will click into the existing cradle. Its going to be far too difficult to remove the cistern and replace the cradle.
Any advice pleas on where I might be...
I've got water trickling into the pan of a toilet. The cistern water level is nowhere near the overflow pipe, so I suspect there's a faulty seal at the bottom of the flush valve (a Geberit model). However, I am unable to detach the flush unit to check. There don't seem to be any side clips to...
Lecica Toilet is quite old (+15 years)
I phoned the manufacturer but they sent me a standard washer for the Lecica Cistern flush Valve but it does not fit!
Dimensions for the one i require are:-
Inside diameter: 75mm.
Outside diameter: 57mm.
Hello
I need to change my flush valve. Can I cut the pipe (photo attached) going in and add flexible hose with a valve? As can’t currently get to the valve as behind the waste pipe.
Thank you for any help
Hello,
I was wondering if anyone knows it this kind of flush valve can be opened to access the flapper to replace it?
The water from the tank is leaking into the bowl one drop at a time and i thonk the rubber flapper os not sealing properly. Can this be ooened in anyway to access the flapper...
My regular plumber wasn't available so thought I'd have a go.
Long story short, flush button broken and couldn't get a compatible replacement. So I bought a Multikwik Multiflush.
To my surprise, I successfully installed it but when I flush, the cistern continues to fill.
Apparently, the...
Hi
I'm trying to replace a bottom entry toilet flush valve - but having problems with tight access and in particular having problems loosening the bolt to get rid of the plastic that remains of the existing valve - see photo attached. I don't seem to have enough room to get spanner or wrenches...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.