T4TS Course..If your on it get in touch

[whitenoise]

Hi Everyone IM Whitenoise!

Im on the T4TS course.

I started a few months ago and now I've managed to get to Mod 10, I'm really enjoying the course struggling a tiny bit with all the reading lol I'm sure I recall the salesman telling me its reading as well as hands on! but so far no hands on just computer based scenarios which aint too bad but having a go at the real thing would be more ideal but Hey ho slowly slowly catchie monkey, I'll just follow how the coutrse is laid out and see if it works, Obvioulsy I'm really hoping to pass the course in time, I'm taking my time but I'm really looking forward to getting my hands on very soon I keep wanting to pop to B&Q to get some pipes and play around, I was hoping to meet anyone else who is also on the course! see how your getting on and maybe just have a general chat about the grand world of plumbing lolol.

If you read this but dont get in touch hope all goes well and you pass your course are successful.

Regards

Whitenoise

 

[andy83]

I've been scouring the forums all day trying to gauge opinion on the best way to train and get into the plumbing industry. Obviously hands on experience is the best way to learn anything, so does anyone with a few years experience have any advice to someone trying to get into the industry about the best route to take? I see that the distance learning option is taking a beating but often the people who end up doing it don't have another option due to other commitments. So how should we go about getting into the industry and getting the important and valuable experience we desperately need?

 

[spanner]

Hi there, wel just read your thread, Well its now over three months since you wrote about your t4t course, just how's it going right now in time for you..??

 

[beanie88]

hey, i dont no weather you were asking the whole thread but i will respond anyways.

i am enjoying it at the mo. still waiting on my practical though on mod 22.

i am working along side another plumber also which is helping be but what i have learned out the book in the real life situations.

my aim is still to work in Canada so as soon as i pass and get a job full time i am always open to more experience on the field.
stu

 

[Charlie251006]

hi Charlie251006 here

i have been looking into taking this plumbing course and i was wondering if you guys have any good feedback for me, and i was wondering if someone could tell me the exact qualifications you recieve by the end of it?

 

[Backboiler]

I completed the course in March this year and I can honestly say I enjoyed every minute of it. I did the six weeks practical (split 3 x 2 weeks) in Leeds. The tutors are excellent, especially Neil and the whole organisation has been restructured for the better this year. The venue in Leeds is now owned by trade4trade skills which means they have control of how things are taught. The back-up from the tutors is excellent as they are still offering me advice 6 months on. If I'm stuck I just call them and they help! I had the good fortune of working with a plumber while studying which helps. Another plus is that they run monthly cash competitions which I won once and came second on another occasion. They also run a major Christmas competition for a grand and I won that. I went on to study the NVQ level 2 and I'm now studying the Gas Foundation course. The qualifications I came out with were as follows: Tech certificate in domestic plumbing Level 2, NVQ in domestic plumbing Level 2, Water regs certificate and Energy Efficiency Level 3. I'm aware that T4TS's have come in for some stick in the past but my experience was brilliant. Listen to the salesman, ask questions, work hard, don't be tempted to take shortcuts and there's no reason why you wont enjoy learning too. BTW, Leeds, Wakefield and surrounding towns are brilliant places to stay if you have to.

 

[jam1979]

hi all im doing a course with t4ts im on module 11 hopeing to go to leeds early nxt year for my first 2 weeks how does the accomodation work as they said they pay for it and how soon do u go for practicals after theve been in touch with the arrangments the course it mint by the way ive already gaing loads of knowledge and done a bit of plumbing round the house and for friends

 

[jam1979]

hi all with this being a 2 year course its gonna take me 3 years to pay for it can i still do it over the 3 years as im in it for the long haul and desperate to be a plumber or would it seem that if after 2 years ive not completed it they will cut me off any feed back would be great thx all

 

[Lawrence-Davis]

hi all doing thr T4TS coures

I started the coures about 2 months ago. just started to do the scenario 3, an a bit stuck on the soundness checks can anyone help

 

[jam1979]

im also stuck on the soundness test though u have 2 check all ur valves and appliances i.e.taps ball valves for leaks and and then do ur pressure test

 

[Lawrence-Davis]

Iin the book Page 183 it soundness teat = Visual inspection, test for leakes, pressure test and final checks.
dont know how to do the pressure test! do u have any ideas

 

[jam1979]

under the sink ull see the washer pipes disconnect them then connect the pressure test turn valve on then turn it off and reconnect washer pipes

 

[Dawny]

HIYA! im so glad you all seem to be enjoying it. just started on mine and am really worried about all the bad thing's i have heard about this course. Saw it advertised on TV so decided to look into it. Signed up now i found a lot of bad press about it. Have decided to persevere with it and get practical experiance while i do the course so by the time i have finished the course i hope to have enough practical experiance to be able to get a job. good luck to all!

 

[jam1979]

good luck to u i read all that stuff but it seems to me that the only bad press comes from those who started but dnt want to see it through

 

[robdavis]

I heard the same.

However, for a distance learning college, they are really good. I've made it through the first two week practical and am submitting modules 13 - 24 now. (I've done the work, it just takes time to keep getting the code to access the TMA on the CD).

The first two weeks helped me get confidence with the practical side, it was quite intensive and I enjoyed it all. I attended the new centre in Hartlebury near Kidderminster. The centre was really well equipped, they have a canteen and free internet access on breaks. The tools and bays are neat and new. The tutors spent loads of time asking if you neeed any help and were always around. If you ever asked for help, you get full-on help, felt good to have that level of tutoring.

I had already done week 1 and 2 in Southampton last year, which was for the 'foundation level'. Unfortunately this was for the 6128 which became redundant, so when I upgraded to the intermediate tech cert 6129 level 2, I had to retake the week 2 this year. (I did still get the 6022 and 6032 C&G from last year plus the extra practice).

Southampton was good too, but not as good as Hartlebury.

I'm looking forward to taking my next two weeks in the next few months.

The only problems I've had with this course is the booking of the practical. I was quite lucky this time to get a booking for only 1.5 months in the future (October 4th) after I had completed module 12. The thing was, if I couldn't have made that week, I would have had to wait at least until February / April for a space.

They seem totally booked up, so it extends the time it takes to finish. It's compounded by the fact that you can't book it until the modules are completed. So there's a gap in learning.

Apart from that, the study books are good. I complimented mine by buying the Heinemanns Plumbing NVQ level 2 study book which is excellent for cross reference. I woudl highly recommend it, it's about £20 on Amazon.co.uk

I read the scare stories too, but I haven't really seen any evidence of it.

My biggest worry which does seem to be aparent is the lack of placements out there. People with better qualifications (full NVQ 2/3 + Gas Safe [ACS] + Part P) are struggling to get placements so how can I expect to get work when I finish my lowly tech cert 6129?

It seems the only way in to the industry is to buckle up and get self-employed. It sounds exciting to me and I think I'd be ok, there's just the feeling that to learn alongside someone would really be the best. I wouldn't mind shadowing someone for no pay, as long as I could learn about the 'real' work that happens in the real world. The troubleshooting and small tricks can only be picked up this way.

I've already written to local plumbers / contractors in my area, but I was deafened by silence. I called too, but most of the time I was told politely 'no' (even for working for free).

One of the students mentioned that his course type (full / advanced or something) includes getting placements with a company in the price. I suggest that it's worth it if you can get a guranteed placement, even for an extra thousand pounds or whatever. I think the benefit will be immense. Plus the reduced stress of trying to find someone to take you on.

 

[robdavis]

Also, for getting money back after the practical -

I asked last year and they will refund £30 per day of expenses, if you live more than 30 miles away from the centre.

To get the money you will need to send all receipts / invoices/ tickets or whatever and a written letter to the admin of T4TS. They only process the requests at the beginning of each month, after which you'll get your money in about 2 weeks. So if you sent your receipts on the 5th November, you should get your money back by 19th December.

I hope this helps.