Search the forum,

Ravenheat CSI 85 AAA Boiler enquiry.

Post new thread

Discuss Ravenheat CSI 85 AAA Boiler enquiry. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Z

ziggma

Hey guys,

I have a problem with a brand new fitted Ravenheat CSI 85 AAA boiler.

I own second property where I fitted this brand new boiler a year and a half ago. The system was never filled until 3 weeks ago and the pressure gauge does not register when filling. This obviously now will be out of warranty. Would the expansion vessels pressure affect the gauge working and what psi should the vessels be?

Many Thanx ziggma
 
Status
Not open for further replies.

Reply to Ravenheat CSI 85 AAA Boiler enquiry. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

T
Oil Boiler and System upgrade
Hi All, We have finally decided after a bit of a persuasion to have installed a utility room in our garage that currently houses our oil boiler. Initially we thought the boiler may stay in place but after discussions with the builder we would have to move the boiler to replace the floor and...
Replies
7
Views
837
Type2jim
T
M
Expansion Vessel leaking water - no air or water from Schrader valve?
Hey, I've got a Grant Vortex that's leaking water from the seal around the expansion vessel - it's the round type about 50cm wide. The system is at 1.5 - 2 bar, but the expansion vessel has no air in it, and it's leaking water. No water is coming out of the Schrader valve either. The system...
Replies
2
Views
1K
SimonG
SimonG
G
Need Advice about Boiler and Central Heating Repair Please
Hi. I'm having some issues with my boiler / central heating and have enlisted a local 'Combi Heating Specialist' to sort it out but he seems to be making things worse. I really need another expert's opinion, to put my mind at rest, or help me make the decision to stop using his services. I...
Replies
24
Views
3K
Timmy D
T
U
Boiler Pressure dropping.
Hi everyone.! I have a Betacom 2 24 Boiler ( 10 years old) and have been having issues with the pressure dropping. So far, I have had 2 Engineers visit, resulting in fitting a new Pressure Release Valve and a new Expansion Vessel. Both to no avail so far. The pressure tends to drop down to...
Replies
2
Views
847
plumbingdoctor
plumbingdoctor
I
Is this illegal/dangerous!
hi can any qualified heating engineer comment on this set up that i just discovered at my elderly parents house? on a recent visit, and upon being told by them that "the heating is not working well" i discovered that their oil boiler heating system needed topping up via the filling loop...
Replies
3
Views
1K
SimonG
SimonG
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock