Discuss Rad cold in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
11
Hi<br/>I fitted an extra rad in my sisters living room today. Boiler is in loft. Teed into 22mm flow and return in loft with 15mm pipe. Ran pipe 30ft across loft then down to rad. Rad cold! Both rad valves open."
 
Welcome to the forum keith, have you bled the rad of air?
 
Hi<br/>I fitted an extra rad in my sisters living room today. Boiler is in loft. Teed into 22mm flow and return in loft with 15mm pipe. Ran pipe 30ft across loft then down to rad. Rad cold! Both rad valves open."

any water in the rad (might be an air lock)
what kind of system is it?
 
I need to know who mavis beacon is

turn every single rad off but that one and report back, and the valves are the right way round ? trv on the flow etc
 
If you tee'd in the loft and ran horizontal, then dropped you can guarantee an air lock. Shut off both rad valves, take out the air point (towel for spillage) connect a male 15mm adapter with a flexi tap adapter attached. Aim the flexi into a large bucket and open one valve at a time, you should get a mix of air and water, once yo get only water the air lock should be gone.

However make sure you have one tee in the flow and one in the return! :)
 
Sorry, one, 60ft overall.

too long should be 22mm sorry but still might work, could be an air lock try above comment but make sure its a flexible with a valve on it
 
Will probably still work... a bit.

Yeah defo a flexi tap adapter, when i remove air locks this way its ALWAYS a two man job :)
 
Status
Not open for further replies.

Reply to Rad cold in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. I noticed this winter my living room rad only get hot in the top half. Radiator is 1600mm(DP SC) double panel single convector. System...
Replies
1
Views
496
Hi - I'm a reasonably experienced DIY plumber but just can't work out why the last new rad I've installed is cold - would really appreciate your...
Replies
7
Views
679
Hi thank you for letting me join this forum . We have an air to water heat pump but the bungalow is piped in micro bore 10mm pipe which doesn’t...
Replies
4
Views
376
Hi All Bit of an urgent one being that time of year and can't get a plumber out until after xmas even on an emergency callout I have just...
Replies
2
Views
353
I need to extend my central heating from my newly built extension in to the old part of my house. I need to feed 3 rads in separate bedrooms on...
Replies
2
Views
200
Back
Top