Search the forum,

Marflow PL8 Bracket Hole Cut Out

Post new thread

Discuss Marflow PL8 Bracket Hole Cut Out in the USA area at PlumbersForums.net

A

alfa20ad

Messages
49
Just about ready to fit wall panel over this bracket, instructions say 50mm cut out around pipes, this seems a bit excessive, can anyone advise if i can go smaller than this?
 
It looks like they're suggesting 50mm when using tiles, perhaps to give a grout gap to match that of the tiles.
If you are drilling a panel I don't see why you shouldn't go for a smaller clearance, as long as there is some.
 

Reply to Marflow PL8 Bracket Hole Cut Out in the USA area at PlumbersForums.net

Similar plumbing topics

B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
225
ShaunCorbs
ShaunCorbs
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
221
dreikher
dreikher
N
Oversize kitchen sink top/drainer buying one.
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
187
turnpin
turnpin
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
397
Chuck
C
D
UK Pipes for thermostat shower fitted at different heights
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes sunk into wall behind bath. Walls have fresh tiles. Have realised as about to fit shower these pipes one is set higher than the other. If you fit a...
Replies
2
Views
242
fowlerboi
F
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tile Cutters
Tiling Forum UK
Tiling Forums
Plumbers Forum - Plumbing Advice
Electricians Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock