Search the forum,

Alpha CB28 problem. Can anyone advise please?

Post new thread

Discuss Alpha CB28 problem. Can anyone advise please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

Vwsplituk

I have a boiler problem that I was hoping someone here could shed some light on.
We've currently got no heating or hot water coming from our Alpha CB28 boiler. Both the red 'A' light and green 'B' light are flashing every second. I can reset the boiler and the green light flashes as normal, but as soon as the heating or hot water is needed you hear a click of the relay kicking in (and pump starting if the CH has been demanded), but nothing happens, and then the red light starts flashing too.


Would this be something somebody could help me diagnose please?
Many thanks,
Paul.
 
Have you got pressure in the heating system?
Have you got gas at another appliance (hob)?
 
scott_d said:
Have you got pressure in the heating system?
Have you got gas at another appliance (hob)?
Click to expand...

Hi there. Cheers for responding. Yep, there's water pressure in the system and the hob has gas just fine.
the plot thickens?
 
You'll need your GSR engineer to visit,
 
Status
Not open for further replies.

Reply to Alpha CB28 problem. Can anyone advise please? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Drayton Digistat 2RF - Heating & Hot Water not working
Heating and hot water is not working. Plenty of heating oil. I have replaced batteries in thermostat and it seems to be working ok, showing flame to call for heat, and the receiver seems to be working ok with green light, but heating is just not firing. I really am not sure what the problem is...
Replies
5
Views
331
Sapphire60
S
J
Worcester Bosch 35CDi - All lights flashing problem
Hello, I have a Bosch 35CDi, and today found all the lights flashing on the front. Normally I can reset the boiler, but this did not work. There isn't an error code, since even the error code display is flashing. I have searched the internet but cannot see this problem elsewhere, since every...
Replies
2
Views
713
Deleted member 120897
D
paulm05
Grant combi oil boiler problems.
My Grant combi oil boiler is giving me quite a headache at the moment. When I returned home last Friday I'd no heating or hot water. An engineer called the next day and diagnosed a faulty pressure switch. This was changed and everything seemed ok. However then the boiler began to lose pressure...
Replies
3
Views
555
exedon2
exedon2
K
Main 24HE constantly cutting out and firing back up on HW and Heating and intermittent flame failure light.
I am having a problem with my main 24he boiler where the flame is constantly clicking on and off with the heating and when using hot water. Some times the flame failure light comes on but it ignites again after a few seconds. The plumber has changed a couple of sensors on the boiler and checked...
Replies
6
Views
423
cjg
C
S
Can I override boiler ,thermostat broken
I have a ideal logic 30 boiler ,the thermostat receiver looks to have died ( no lights on wired receiver ) I believe this need# replacing but in the mean time does anyone know if I can override the thermostat if heating is required please? the handheld thermostat is working it’s the boiler...
Replies
1
Views
817
ShaunCorbs
ShaunCorbs
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Standards BS5389
Tiling Tools for Beginners
Tiling Advice
Electrical Advice
Tilers Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock