10mm inlet side entry Torbeck??

[drips'n'shiz]

In that case I'd change it for a 15mm one. Not worth all the time and trouble trying to fit it.

imho

Nah, then id have to change the cistern

 

[Mike Jackson]

You probably need to go to the manufacturers to get a replacement.

 

[ecowarm]

[DLMURL="http://www.opella.co.uk/torbeck38brass.html"]Torbeck Brass Tail[/DLMURL]

 

[drips'n'shiz]

to torbeck manu's do you mean? their website is still under construction :0(

 

[tamz]

^^ beat me to it :smile:

 

[REDSAW]

its a 3/8'', got a couple from screwfix.

 

[drips'n'shiz]

[DLMURL="http://www.opella.co.uk/torbeck38brass.html"]Torbeck Brass Tail[/DLMURL]

Yes, this is it, do you think il only find online? thanks for your help

 

[tamz]

http://www.*************/p/fluidmas...Fluidmaster Euro Bottom Entry Fill Valve 3/8"

scr ewfix code 87426

 

[drips'n'shiz]

its a 3/8'', got a couple from screwfix.

Brilliant!!! i didnt see them on their website, if screwfix do them then the small merchants will. oh thank god for that, its always the little jobs you do after work as a favour that go **** up isnt it?!

 

[johnnyplumb]

The best way to deal with this, if it's a plastic cistern, is to drill the hole through the cistern out to suit the 1/2" torbeck valve. you can do that in minutes, certainly alot quicker than running back to the merchants to change the torbeck valve for a 3/8" valve. It's always better to do the job on the first visit.